Information
-
Document No.
-
Location
-
Unit Number
-
Conducted on
-
Prepared by
-
Picture of Unit.
Drum and drive assy.
-
1.1 Bearings: Inspect all bearings for wear, replace if wear is noticed, and grease all grease certs
-
1.2 Drive Chains: Inspect for proper tension & alignment. All nuts/screws tight. All cotter pins in place. Lubricate all chains.
-
1.3 Planetary gearbox: Insure oil is clean. Oil level is full. Change if questionable.
-
1.4 Hydraulic Hoses & connections: Insure all quick connects are in working order and not leaking. Replace all hoses with wear or damage.
-
1.5 Brake: Insure pressure relief valve is set at 350 psi and not leaking.
-
1.6 Guards: insure all guards are in place and secured
-
1.7 Drum securing chains: Insure all chains/turnbuckles are cleaned and lubricated, shackles pins secured, and no make shift pins.
-
1.8 frame work: Insure all bolts are in place and tight. Inspect for structural cracks.
-
1.9 Rigging: Insure slings are in good shape and in date. Insure certification tags are in place. Insure cotter pins are on safety shackles.
HP Manifold
-
2.1 Debooster: Check condition including hoses and connections. Insure proper oil fill to attain proper gauges function & verify.
-
2.2 Ball drop: Remove cap to insure there is no debris or obstruction. Grease threads and reassemble.
-
2.3 2" Hammer valves: Grease, open/close freely & insure there is no leaks.
-
2.4 HP Swivel: Insure all studs & and nuts are tight. No leaks during pressure testing.
-
2.5 Pressure test: See test procedure on back, perform all steps, no leaks allowed.
Level Wind Assy.
-
3.1 Level Wind: insure all assembly bolts are tight, bearings are good and greased. Inspect pawl for wear and grease. Replace if wear is excessive.
-
3.2 Clutch assembly: insure there Is no missing disc, adjustment nut is tight, set screws in place, and sprocket setscrews in place, and sprockets setscrews are tight.
-
3.3 Worn gear: Insure it is not bent , all bolts are tight, cleaned and greased.
-
3.4 Counter head: Clean all dirt/debris, counter wheel aligned, set screws are tight and never seized, inspect all bearings and grease, chain deflection <1/8".
Certification
-
Addition comments or concerns not other wise addressed.
-
Operator signature
-
Supervisor Signature
