Luminator Destination Signs W/ INFOtransit FAI Inspection

• Site conducted

  Select

• Conducted on

  Date

• Prepared by

• Location
  Address

• Bus #

INFOtransit

• Monitor 1 TFT #

• Monitor 2 TFT #

• Monitor 3 TFT #

• Monitor 4 TFT #

• VAS Model Number

Physical Installation

• Monitor 1 mounted securely

  Safe

  At Risk

  N/A

• Monitor 1 Cabling Secured Neatly

  Yes

  No

  N/A

• Monitor 2 Mounted Securely

  Safe

  At Risk

  N/A

• Monitor 2 Cabling Secured Neatly

  Yes

  No

  N/A

• Monitor 3 Mounted Securely

  Safe

  At Risk

  N/A

• Monitor 3 Cabling Secured Neatly

  Yes

  No

  N/A

• Monitor 4 Mounted Securely

  Safe

  At Risk

  N/A

• Monitor 4 Cabling Secured Neatly

  Yes

  No

  N/A

• Multimedia Computer and Auxilary Equipment Cabling Secured Neatly

  Yes

  No

  N/A

• Mutlimedia Computer and Auxilary Equipment Mounted Securely

  Safe

  At Risk

  N/A

• GPS Antenna Mounted Securely

  Yes

  No

  N/A

• GPS Antenna Cabling Secured Neatly Away From Other Antennas

  Yes

  No

  N/A

• GPS/WLAN Antenna Cable secured at Multimedia Computer and Bend Radius is Observed

  Pass

  Fail

  N/A

• Is The Mounting Surface Sufficient For Anticipated Loads

  Safe

  At Risk

  N/A

Functional Test

• Monitors Do Not Operate In Master Run

  Pass

  Fail

  N/A

• Monitors Operate In Master Run "DAY" Position

  Pass

  Fail

  N/A

• Monitors Operate In Master Run "Night" Position

  Pass

  Fail

  N/A

• Monitors Do Not Operate In Master Run "Park" Position

  Pass

  Fail

  N/A

• Using MCU and Monitor Status Screens, verify GPS Satellite reception NOTE: Must Be Outside and Operational For 5 minutes

  Pass

  Fail

  N/A

• Using MCU and Monitor Status Screens, Verify Stop Request and Door Inputs

  Pass

  Fail

  N/A

• With Both Doors Closed, Verify Stop Request Function Displays on Monitors

  Select Pass Fail N/A

  • Pass
  • Fail
  • N/A

• Open front door, verify Stop Request message is cancelled on Monitors

  Pass

  Fail

  N/A

• With Both Doors Closed, Verify Aid Stop Request Function Displays on Monitors

  Pass

  Fail

  N/A

• With Both Doors Closed, Verify Bike Stop Request Function Displays On Monitors

  Pass

  Fail

  N/A

• Open Rear Door, Verify Aid Stop and Bike Request Message Is Cancelled On Monitors

  Yes

  No

  N/A

• Verify Security Camera Feeds Are Displayed In Media Display Pool

  Yes

  No

  N/A

• Monitors Blank After Shut Down (Delay)

  Pass

  Fail

  N/A

• Programmed with Test Data Set

  Yes

  No

  N/A

• Confirm Destination Code Selection via AVL System

  Pass

  Fail

  N/A

Electrical Characteristics

• Are Vehicle Circuit Breakers Properly Rated?

  Yes

  No

  N/A

• Are All Wires Of Correct Gauge For Peak Anticipated Loads?

  Yes

  No

  N/A

• Are Exposed Wires, Subject To Wear and Possible Damage, Protected With An Abrasion Shield?

  Yes

  No

  N/A

• Are Antennas Routed Away From Communication Cables

  Yes

  No

  N/A

Software

• Verify Software Version

• Verify Presentation Running On All Monitors

  Yes

  No

  N/A

• Does System Shut Down After Pre-Determined Amount Of Time

  Yes

  No

  N/A

• Is SW Port on VAS Controller (for upgrades, diagnostics) Acessible Without Major Disassembly?

  Yes

  No

  N/A

• Does The Vehicle ID Show On The Status Screen?

  Yes

  No

  N/A

• Is the MCU IP Address Correct?

  Pass

  Fail

  N/A

• Is the VAS Controller IP Address Correct?

  Pass

  Fail

  N/A

• Verify IP Address for Monitor #1 (Primary)

• Verify IP Address for Monitor #2

• Verify IP Address for Monitor #3

• Verify IP Address for Monitor #4

• Do Camera Views Display on all the INFOtransit Monitors

  Yes

  No

  N/A

• Does The Video Play On All The INFOtransit Monitors

  Yes

  No

  N/A

• Does The Audio Of The Video Play OnAll INFOtransit Monitors?

  Yes

  No

  N/A

• Does The Correct GPS Lat/Long Show On The Status Screen?

  Yes

  No

  N/A

• Is The Time Correct On The Status Screen?

  Yes

  No

  N/A

Sign Offs

• Luminator Representative

• Title

• Date

  Date

• OEM/TA Representative

  Sign

• Title:

• Date:

  Date

DESTINATION SIGNS

• Front Sign Date Code

• Dash Sign Date Code

• Side Sign Date Code

• Street Sign Date Code

• Rear Sign Date Code

• Auxilary Sign Date Code

• Auxilary Sign Date Code

Physical Installation

• MCU Mounted Securely

  Yes

  No

  N/A

• MCU Cabling Secured Neatly

  Yes

  No

  N/A

• Front Sign Mounted Securely

  Yes

  No

  N/A

• Front Sign Cabling Secured Neatly

  Yes

  No

  N/A

• Rear Sign Mounted Securely

  Yes

  No

  N/A

• Side Sign Mounted Securely

  Yes

  No

  N/A

• Side Sign Cabling Secured Neatly

  Yes

  No

  N/A

• Rear Sign Mounted Securely

  Yes

  No

  N/A

• Rear Sign Cabling Secured Neatly

  Yes

  No

  N/A

Functional Test

• Signs Do Not Operate In Master Run "OFF"

  Yes

  No

  N/A

• Signs Operate In Master Run "DAY RUN"

  Yes

  No

  N/A

• Signs Operate In Master Run "NIGHT"

  Yes

  No

  N/A

• Signs Operate In Master Run "PARK" Position

  Yes

  No

  N/A

• MCU Displays Message Code on Default Screen

  Yes

  No

  N/A

• All Signs Display Test Pattern when selected

  Yes

  No

  N/A

• Verify Front Sign Dims when Photocell Is In Low Light

  Yes

  No

  N/A

• Verify Side Signs Dim When Photocell Is In Low Light

  Yes

  No

  N/A

• Verify Rear Sign Dims When Photocell Is In Low Light

  Yes

  No

  N/A

• Verify Auxilary Signs Dim When Photocell Is In Low Light

  Yes

  No

  N/A

• Verify All Signs Display Emergency Message

  Yes

  No

  N/A

• Verify All Signs Cancel Emergency Message

  Yes

  No

  N/A

• Verify All Signs Blank After Shut Down (Delay) Blanking Time=30 Seconds

• Programmed with Latest Message Listing

  Yes

  No

  N/A

• Confirm Destination Code Selection via AVL System Controller

  Yes

  No

  N/A

Software

• MCU Firmware

• Verify Correct Configuration Is Loaded To MCU

  Pass

  Fail

  N/A

• Verify Vehicle ID Is Set.

  Yes

  No

  N/A

• Confirm MCU Shutdown After 30 Seconds

  Pass

  Fail

  N/A

• Is SW Port (For Upgrades, Diagnostics) Accessible Without Major Disassembly?

  Yes

  No

  N/A

• Is There A Requirement For Delayed Blanking?

  Yes

  No

  N/A

• Does The MCU Interface with a CAD/AVL system? (Ex: Clever Devices, Conduent, Trapeze, etc.)

  Yes

  No

  N/A

• Verify Connection To RAM Server

  Yes

  No

  N/A

Electrical Characteristics

• Are vehicle Circuit Breakers Properly Rated?

  Yes

  No

  N/A

• Are All Wires Of Correct Gauge For Peak Anticipated Loads?

  Yes

  No

  N/A

• Are Exposed Wires, Subject Wear and Damage Protected By Abrasion Shield?

  Yes

  No

  N/A

Sign Offs

• Luminator Representative

• Title:

• Date

  Date

• OEM/TA Representative

  Sign

• Title:

• Date

  Date