Information
-
Conducted on
-
Training Centre Location
- Knaresborough
- Birmingham
- Osterley
- Crewe
- Alba
- Bedford
- Crawley
- Bristol
-
Engineer Name
-
Payroll Number
-
Assessor Name
Flat Roof Working
Manual Handling
-
Delegate will be required to demonstrate a safe method of performing a Manual Handling task as shown by the trainer
-
Correct use of any required PPE
-
All loads lifted safely using the correct techniques
-
All loads are carried safely using the correct techniques
-
All loads are lowered safely using the correct techniques
-
Roof Rack lowering techniques demonstrated correctly
-
Comments
Combination Ladder - Triple Extension
-
Delegate will be required to safely and correctly install the Combination Ladders in a Triple Section form
-
Microlite fitted correctly
-
Y-Hang and Rope fitted correctly
-
Ladders lifted and lowered in a safe and controlled manner
-
Laddermate fitted correctly
-
Ladders secured correctly to the eyebolt
Combination Ladder - A-Frame Facing the Wall
-
Delegate will be required to safely and correctly install the Combination Ladders in an A-Frame form and place them facing the wall, where necessary the ladders MUST be secured correctly
-
Correct use of any required PPE
-
Ladders fully open, stable & locked
-
Ladders correctly secured using an eyebolt and strap
-
Correct maximum working height indicated
Combination Ladder - A-Frame side on to the wall
-
Delegate will be required to safely and correctly install the Combination Ladders in an A-Frame form and place them side on to the wall, where necessary the ladders MUST be secured correctly
-
Ladders fully open, stable & locked
-
Ladders correctly secured using an eyebolt and strap
-
Comments
Sign Off
Engineer Declaration of Competence
-
I fully understand the control measures, Safe Systems of Work (SSOW) and risk assessment procedures adopted by Home Service & Supply
I know how the 3 Ladder Hierarchies are used and where to find them for reference
I understand the need for and process required for Risk Assessments
I know how to reduce the risk involved with any Manual Handling task by using the correct techniques and following the TILEO framework
I know how the Safe System of Work requires me to use the Combination Ladders
I have been practically assessed on the correct method of setting up and securing the Combination Ladder and am competent to do so
I understand that I must wear company provided uniform and PPE items ONLY
I understand that I must check my Health & Safety Equipment before each use
I understand that I must escalate to my manager any situation which I am unsure of prior to and work being performed -
Document Signed on:
-
Engineer Name:
Trainer Sign Off Record
-
Observed by:
