Mobile Crane Jobsite Inspection Checklist

Crane has adequate access around site?

Jobsite provided with adequate material staging area?

Adequate room for crane assembly/disassembly?

Pre-planning meeting conducted before assembly/disassembly?

Qualified person supervised assembly/disassembly?

Crane selected is appropriate for load capacity and reach?

Crane operator training verified?

Crane's annual inspection available?

Crane setup on stable surface - Compacted soils, Drained, Firm?

Outriggers extended - Wheels off ground?

Blocking/Cribbing adequate size (Size = 3x float size)?

Crane setup level?

Swing radius barricaded to prevent access - employee training?

Lift route planned to prevent worker exposure to falling loads?

Marked boundary

or 360 max radius

Crane could get within 20' of powerline?

Letter or notification from power company verifying powerline voltage received?

Pre-Planning meeting

Non-Conductive tag lines in place?

Elevate warning lines, or

Barricades, plus

A spotter, or

Range limiter, or

Warning device, or

Insulating link?

Employee training provided for powerline hazards?

Qualified riggers present - Training verified?

Rigging equipment appropriate for load to be lifted?

Slings, spreader bars or chains checked for certifications?

Rigging inspected?

Qualified signal person present - training verified/documented?

Hand signals posted at Jobsite?

Daily Pre-lift meeting conducted?

Competent person performed daily inspection and at each shift change?

Competent person performing and documenting monthly inspection?

Crane suspended personnel platform in use?

If yes, has the design/use been verified - Trial run per 1926.14 conducted?

Airport/Helipad locations nearby?

Multiple crane use - Coordinate procedures

Multiple crane use - Critical lift plan in place?