Information
-
Audit Title
-
Document No.
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
Critical Lift Plan Required?
-
Crane has adequate access around site?
-
Jobsite provided with adequate material staging area?
-
Adequate room for crane assembly/disassembly?
-
Weather Conditions
-
Pre-planning meeting conducted before assembly/disassembly?
-
Qualified person supervised assembly/disassembly?
-
Crane selected is appropriate for load capacity and reach?
-
Crane operator training verified? NCCCO Certified?
-
Crane's annual inspection has been verified?
-
Crane's wire cable inspection has been verified?
-
Crane setup on stable surface - Compacted soils, Drained, Firm?
-
Outriggers extended - Wheels off ground?
-
Blocking/Cribbing adequate size (Size = 3x float size)?
-
Crane setup level?
-
Swing radius barricaded to prevent access - employee training?
-
Lift route planned to prevent worker exposure to falling loads?
-
Work Zone Defined
-
Marked boundary
-
or 360 max radius
-
Crane could get within 20' of powerline?
-
or Distance per table
-
Powerline voltage
-
Distance
-
Letter or notification from power company verifying powerline voltage received?
-
Safety Measures In Place
-
Pre-Planning meeting
-
Non-Conductive tag lines in place?
-
Elevate warning lines, or
-
Barricades, plus
-
A spotter, or
-
Range limiter, or
-
Warning device, or
-
Insulating link?
-
Employee training provided for powerline hazards?
-
Qualified riggers present - Training verified and onsite?
-
Rigging equipment appropriate for load to be lifted?
-
Slings, spreader bars or chains checked for certifications?
-
Rigging inspected?
-
Tag lines attached?
-
Softeners used?
-
Qualified signal person present - training verified/documented?
-
Hand signals posted at Jobsite?
-
Daily Pre-lift meeting conducted?
-
Competent person performed daily inspection and at each shift change?
-
Competent person performing and documenting monthly inspection?
-
Safety Manager
-
Superintendent/Foreman
-
Crane Operator