Negotiated Training Plan Mobile Equipment

Information

Audit Title
Document No.
Client / Site
Conducted on
Prepared by
Location
Personnel

New Apprenticeships for the following qualification.
AUR30405- Certificate III in Automotive Mechanical Technology: Heavy Vehicle Mobile Equipment
Student Name:
Employer Name:

Contract Details

Apprentice to complete
Full Name:
Apprentice Address:
Student Number (if known):
Delta Registration Number (when supplied):
Employer to complete
Exmployer Name and Type:
Address:
Contact Name:
Email Address:
Contact Number:
Fax Number:
Group Training Scheme Trainees to Complete
Host Employer Name:
Address:
Contact Name:
Email Address:
Contact Number:
Fax Number:
School Based Apprentices to Complete
School:
Address:
Contact Name:
Email Address:
Contact Number:
Fax Number:
Kangan Institute to Complete:
Registered Training Organisation: Kangan Institute
Address: Private Bag 299, Somerton Victoria 3062
Contact Name:
Contact Number:
Mobile Number:
Fax Number:
Prepared by:
Date:

Determination of Responsibility

The following section is required to identify the responsibility of all parties to this contract.
The workplace supervisor/s is/ are responsible for the trainee and will provide supervision of the trainee's workplace training and assessment. The workplace supervisor will be required to perform the following tasks: periodically review the Training Record Book or other recording mechanism approved by Kangan Institute ( preferably weekly) . Ensure that the trainee is being trained appropriately and by workplace approved personnel and aligned with the training plan. Ensure that training targets are met and the trainee is able to attend the Institute when required. Provide a mentoring and supportive role for the trainees.
Workplace Trainers and Assessors are person(s) that have responsibility for the training and assessment of the trainee(s) in the workplace. These persons are listed below.
Name and Responsibility
Name and Responsibility
Name and Responsibility
Name and Responsibility

Declaration

We, the parties identified in this document, agree to the following Terms and Conditions:- Provision of underpinning knowledge training by Kangan Staff. Assessment of the underpinning knowledge by Kangan Staff. Manner in which the underpinning knowledge is recognized and recorded. Issuing of the trainee's qualification upon successful completion of the Training Plan. Review the composition of the attached "Australian Competency Standards Supplement" at the request of any of the parties to the contract. Ensure that a minimum of four(4), workplace contacts are conducted each year.
The Employer will:- Support the training of the student by managing and assessing the performance of the student in their day to day performance of duties in the workplace. Align the workplace training and assessment in accordance with this Negotiated Training Plan. Contact Kangan Institute regarding:- Any variations to the Negotiated Training Plan. Concerns about the performance of the student or the Negotiated Training Plan. Maintain and provide to Kangan Institute relevant & approved training and assessment records. Ensure all apprentices/trainees undertaking workplace based training atAQF Level 3 are withdrawn from routine duties for a minimum of three hours a week, averaged over a four week cycle, for the purpose of undertaking training/learning activities (pro-rata for part time).
The apprentice will: Monitor their progress in accordance with the Negotiated Training Plan. Report any variances or problems with their Negotiated Training Plan to their employer and/or Kangan Institute at their earliest convenience. Self assess their performance in the workplace and consult with their workplace supervisor or recognized workplace trainers/Assessors on their readiness for formal assessment. Gather and manage up to date evidence to support their claim(s) for recognition. At all attendances, present their Training Record Book/Competency Assessment Record, to allow Kangan Institute staff to update their database, failure to do so, could affect a successful completion of training and subsequent issuing of qualification.
Assessment methods:
Throughout the apprenticeship assessments will be conducted in a variety of ways including: W-Written; P-Practical; O-Observation; R-RPL; V-Verbal and F-Flexible
Clarification on training requirements: Competencies do not need to be started and finalised in their set order. However, level 2 & 3 Competencies cannot be started until the entire previous level has been completed. Variations apply, and are subject to student and employer negotiations and elective selections.
Individual Learning Plan. For mentor use only.
L,L&N support required?
RPL/CT required?
Review date 1
Review date 2
Review date 3
Pathway for 2012

Competency Lists (36 Units are required to complete this qualification).

Note: This qualification must include three (3) core units of competence. Thirty three (33) elective units may be chosen from the list below. A maximum of eighteen (18) elective units may be selected from the units aligned to Certificate II qualifications. A maximum of two (2) elective units may be selected from units aligned to a Certificate IV qualifications.
Compulsory Units (3)
AURC270103A Apply Safe Work Practices. Level 2 Nominal Funding Hours 20 CBC Level 1
AURT366108A Carry out diagnostic procedures. Level 3 Nominal Funding Hours 20 CBC Level 3
AURE271781A Implement and monitor environmental regulations in the automotive mechanical industry. Level 2 Nominal Funding Hours 20 CBC Level 1
Elective Units (33). The following twelve (12) units plus at least one (1) of the transmission units is recommended for Heavy Mobile Equipment specialisation.
AURE218676A Test, Service and Charge Batteries Level 2 Nominal Funding Hours 15 CBC Level 1
AURE218708A Carry Out Repairs to Single Electrical Circuits Level 2 Nominal Funding Hours 40 CBC Level 1
AURE202166B Repair Cooling System Level 2 Nominal Funding Hours 20 CBC Level 1
AURT303666A Repair Diesel Fuel Systems Level 3 Nominal Funding Hours 80 CBC Level 3
AURT304666A Repair and Replace Emission Control Systems Level 3 Nominal Funding Hours 20 CBC Level 2
AURT309166A Repair Hydraulic Systems Level 3 Nominal Funding Hours 60 CBC Level 3
AURT310166A Repair Hydraulic Braking Systems Level 3 Nominal Funding Hours 40 CBC Level 2
AURT311166A Repair Air Braking Systems Level 3 Nominal Funding Hours 50 CBC Level 2
AURTH301166A Repair Engines and Associated Components (Heavy Vehicles) Level 3 Nominal Funding Hours 60 CBC Level 3
AURTH312666A Repair Final Drive Assemblies (Heavy Vehicles) Level 3 Nominal Funding Hours 30 CBC Level 2
AURTH313166A Repair Final Drive (Driveline) (Heavy Vehicles) Level 3 Nominal Funding Hours 30 CBC Level 2
AURTH315166A Repair Steering Systems (Heavy Vehicles) Level 3 Nominal Funding Hours 30 CBC Level 2
At Least one of the Transmission Units below must be selected
AURTH306666A Repair Transmissions Manual (Heavy Vehicle) Level 3 Nominal Funding Hours 40 CBC Level 3
AURTH307166A Repair Transmission Automatic (Heavy Vehicles) Level 3 Nominal Funding Hours 50 CBC Level 3
Choose twenty (20) elective units from below if only one transmission unit was selected or nineteen (19) units if both transmission units were selected.
AURE318966A Repair Instruments and Warning Systems Level 3 Nominal Funding Hours 40
AURE319166B Repair Charging Systems Level 3 Nominal Funding Hours 30
AURE319266B Repair Starting Systems Level 3 Nominal Funding Hours 30
AURE321271A Service and Repair Electronically Controlled Drive Management Systems Level 3 Nominal Funding Hours 50
AURE321771A Service and Repair Electronic Compression Ignition Engine Management Systems Level 3 Nominal Funding Hours 50
AURT200108A Carry out Servicing Operations Level 2 Nominal Funding Hours 20
AURT201170A Inspect and Service Engines Level 2 Nominal Funding Hours 20 CBC Level 1
AURT203670B Service Diesel Fuel Systems Level 2 Nominal Funding Hours 20 CBC Level 1
AURT206670A Inspect and Service Transmissions (Manual) Level 2 Nominal Funding Hours 10 CBC Level 1
AURT207170A Inspect and Service Transmissions (Automatic) Level 2 Nominal Funding Hours 10 CBC Level 1
AURT208170A Service Transmissions (Hydrostatic) Level 2 Nominal Funding Hours 10 CBC Level 1
AURT209170A Service Hydraulic Systems Level 2 Nominal Funding Hours 20 CBC Level 1
AURT210170A Inspect and Service Braking Systems (Hydraulic) Level 2 Nominal Funding Hours 20 CBC Level 2
AURT211170A Inspect and Service Air Brake Systems Level 2 Nominal Funding Hours 20 CBC Level 2
AURT212670A Service Final Drive Assemblies Level 2 Nominal Funding Hours 5
AURT213170A Service Final Drive (Driveline) Level 2 Nominal Funding Hours 5
AURT215170A Inspect and Service Steering Systems Level 2 Nominal Funding Hours 10 CBC Level 1
AURT216170A Inspect and Service Suspension Systems Level 2 Nominal Funding Hours 10
AURT222631A Install Air Conditioning Systems Level 2 Nominal Funding Hours 30 (AC Trainee License Required)
AURT222670A Service Air Conditioning Systems Level 2 Nominal Funding Hours 20 (AC Trainee License Required)
AURT225667A Use and Maintain Measuring Equipment Level 2 Nominal Funding Hours 15 CBC Level 1
AURT270278A Use and Maintain Workplace Tools and Equipment Level 2 Nominal Funding Hours 20 CBC Level 1
AURT300373A Synchronise Plant and Equipment Level 3 Nominal Funding Hours 40
AURT305671A Inspect and Repair Engine Forced Induction Systems Level 3 Nominal Funding Hours 15 CBC Level 3
AURT306170A Inspect, Service and/or Repair Clutch Assemblies and Components Level 3 Nominal Funding Hours 30 CBC Level 2
AURT308166A Repair Transmissions (Hydrostatic) Level 3 Nominal Funding Hours 40 CBC Level 3
AURT309131B Install Hydraulic Systems to Specific Applications Level 3 Nominal Funding Hours 74 CBC Level 3
AURT309140A Manufacture and Install Fluid Power Hose Assemblies Level 3 Nominal Funding Hours 10 CBC Level 2
AURT316271A Inspect, Service and Repair Tracked type drive and support systems Level 3 Nominal Funding Hours 30 CBC Level 2
AURT322666A Repair/Retrofit Air Conditioning Systems Level 3 Nominal Funding Hours 30 (AC Trainee License Required)
AURTH316166A Repair Suspension Systems (Heavy Vehicles) Level 3 Nominal Funding Hours 30
AURV223808A Carry out Soft Soldering Level 2 Nominal Funding Hours 20
AURV223608A Carry out Acetylene Welding and Thermal Cutting Level 2 Nominal Funding Hours 30 CBC Level 2
AURV281108A Carry out Manual Metal ARC Welding Procedures Level 2 Nominal Funding Hours 30 CBC Level 2
AURV281208A Carry out Brazing Procedures Level 2 Nominal Funding Hours 30
AURV281308A Carry out Gas Metal ARC (MIG) Welding Procedures Level 2 Nominal Funding Hours 30 CBC Level 2