NREL Electrical Safety Equipment Inspection

• Document No.

• Date and Time

  Date

Part 1 - General Information

• Facility and Room Number
  Address

• Listing Status

  NRTL Listed

  Unlisted

  NRTL Listed but Modified

  Used Outside of Listing

• Equipment Name and Information

• Property Number

Part 2 - External Inspection

• Equipment Status

  Select New Modified Not Previously Approved In Use Void Retired

  • New
  • Modified
  • Not Previously Approved
  • In Use
  • Void
  • Retired

• Enclosure

• Operator not exposed to any hazard:

  Approved

  Reject

  N/A

• Not damaged:

  Approved

  Reject

  N/A

• Appropriate material:

  Approved

  Reject

  N/A

• Protects contents from operating environment:

  Approved

  Reject

  N/A

• Will contain any arcs, sparks, electrical explosions:

  Approved

  Reject

  N/A

• Power Source - Cord and Plug

• Proper voltage, frequency, phasing, and ampacity rating for the plug and cord:

  Approved

  Reject

  N/A

• Not frayed or damaged:

  Approved

  Reject

  N/A

• Proper wiring of plug:

  Approved

  Reject

  N/A

• Installation according to NEC:

  Approved

  Reject

  N/A

• Proper loading and over current protection and/or equipment branch circuit:

  Approved

  Reject

  N/A

• Power Source - Direct Wired into Facility

• Proper voltage, frequency, phasing, and ampacity rating for the plug and cord:

  Approved

  Reject

  N/A

• Installation according to NEC:

  Approved

  Reject

  N/A

• Proper loading and over current protection and/or equipment branch circuit:

  Approved

  Reject

  N/A

• Grounding:

• All non-current carrying exposed metal is properly bonded and grounded (ground continuity test: less than 1 ohm to ground pin/conductor):

  Approved

  Reject

  N/A

• Ground conductor included if required:

  Approved

  Reject

  N/A

• External auxiliary ground (termination adequate):

  Approved

  Reject

  N/A

• Equipment ground is run with circuit conductors:

  Approved

  Reject

  N/A

Approval Section

• Result

  PASS

  FAIL

• Notice of Non-Compliance Issues

  Yes

  No

• Issues

• PLEASE CALL FOR RE-INSPECTION WHEN CORRECTIONS HAVE BEEN COMPLETED. APPROVAL IS REQUIRED.

• NOTE: Approved equipment will be installed and used in accordance with the instructions provided by the designer/builder and ESO.

• Attachments

  Yes

  No

• Sketch

  Drawing

• Pictures

  Media

• Inspector

  Sign

• This inspection has been performed in accordance with the National Electrical Code , NFPA 70E, and the NREL LLP for Electrical Safety. This inspection is only for immediate danger issues and is not to replace a full NRTL inspection as per the NREL LLP.

• National Renewable Energy Laboratory
  15013 Denver West Parkway - Golden, CO 80401