Title Page

  • Document No.

  • Audit Title

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

  • Before Test Run

  • Inspect system for debris and missing guards.

  • Inspect for fuel, oil, and water leaks.

  • Check all belts for tension and condition.

  • Check engine oil level.

  • Check engine coolant level.

  • Check air filter.

  • Check operation of engine block heaters,

  • Check battery specific gravity.

  • Check battery electrolyte level.

  • Check fuel level.

  • Drain water from Diesel fuel filters.

  • During Test Run

  • Measure engine cracking time.

  • Check for noise and vibration.

  • Check oil pressure.

  • Check fuel pressure.

  • Check generator frequency and voltage.

  • Inspect exhaust system for leaks.

  • Check operation of radiator louvers.

  • Check engine operating temperature.

  • After Test Run

  • Inspect for heat damage to areas around the exhaust system.

  • Drain the exhaust system condensate trap.

  • Check battery charge rate.

  • Reset start switch to automatic position.

  • Check fuel level.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.