Title Page
-
Location
-
Date of inspection
-
Inspection carried out by
-
Job Title
- Building & Fire Safety Coordinator
- Compliance Administrator
- Building Safety and Compliance Manager
- Other - type in notes box
Door Summary
-
Number of final exit doors
-
Total number of communal doors
-
Detail different types of doors
General door inspection
-
Is the door and frame free from damage?
-
Is the frame secure and fully sealed?
-
Is the gap between the door and frame 3mm/4mm or less?
-
Is the gap below the door less then 8mm?
-
Is there a door closer fitted, functioning correctly and free from damage?
-
Does the door close correctly around the whole frame from any angle?
-
Is there a hold open device fitted, does it work correctly<br>and release when tested?
-
Are intumescent seals in place and without damage/ not painted over?
-
Is signage fitted and visible, keep shut etc?
-
Is any glass fire resistant with a kite mark?
- Yes
- No
- N/A
-
Are there intumescent seals around the glass?
-
Are suitable steel hinges and screws fitted, free from damage with no signs of wearing?
-
Are locks/handles/push bars etc fitted correctly and free from damage?
-
Are any doors propped/wedged open?
-
Is the door free from obstacles, preventing safe use in an emergency?
-
Any other issues not covered above
Photos of Communal Doors
-
Upload photos of all communal doors in the block
