Title Page
-
Conducted on
-
Prepared by
-
Location
Compartmentation
-
Are all service entries through compartment walls adequately fire stopped?
-
What is the issue?
- Supply pipework
- Waste pipework
- Cables
- Ventilation duct
-
Has the required fire stopping been completed?
-
Take Photo
-
Take photo
-
Are there any open cavities that require to be fire stopped (top of meter cupboards etc.)
-
Take Photo
Cable Supports
-
Are cables in communal areas adequately supported in accordance with the 18th Edition of the IET Wiring Regulations (BS 7671)?
-
How many linear metres of cables require support?
Doors
-
Do doors have identification numbers? (communal internal doors only)
-
Have identification number plates been applied to doors? (numbers to start from ground floor and clockwise sequenced)
Door 1
-
Door location?
-
Does the door have any markings or certification to confirm a fire door?
-
Is the door a notional fire door?
-
Door thickness?
-
Does the door have any glazing?
-
Is the glazing fire rated (markings)?
-
Is doorset in good condition (damaged, bowed, twisted etc)?
-
What is the issue? (damaged, bowed, twisted etc.)
-
Is the door and frame fitted correctly (door gaps, frame securely fixed etc.)?
-
What is the issue? (gaps over 4mm, frame loose etc)
-
Is fire stopping adequate between frame and supporting construction where visible?
-
Are frame and door stops sized appropriately?
-
Hinge type?
-
Number of hinges?
-
Intumescent strips/smoke seals fitted and in good condition
- No intumescent strips or smoke seals
- Intumescent strips only and in poor condition
- Intumescent strips only and in good condition
- Combined intumescent strip and smoke seals in poor condition
- Combined intumescent strip and smoke seals in good condition
-
If a door closer is fitted does it close the door in a controlled manner fully?
-
Has the closer been adjusted to suit?
- Yes
- No
- Correct adjustment not possible - new closer required
- Correct adjustment not possible - new closer fitted
-
Is ironmongery fitted appropriate and fire rated?
-
Are fire door keep shut or fire door keep lock signs fitted ?
-
Were appropriate signs fitted?
-
Take photo of door both sides
Door 2
-
Door location?
-
Does the door have any markings or certification to confirm a fire door?
-
Is the door a notional fire door?
-
Door thickness?
-
Does the door have any glazing?
-
Is the glazing fire rated (markings)?
-
Is doorset in good condition (damaged, bowed, twisted etc)?
-
What is the issue? (damaged, bowed, twisted etc.)
-
Is the door and frame fitted correctly (door gaps, frame securely fixed etc.)?
-
What is the issue? (gaps over 4mm, frame loose etc)
-
Is fire stopping adequate between frame and supporting construction where visible?
-
Are frame and door stops sized appropriately?
-
Hinge type?
-
Number of hinges?
-
Intumescent strips/smoke seals fitted and in good condition
- No intumescent strips or smoke seals
- Intumescent strips only and in poor condition
- Intumescent strips only and in good condition
- Combined intumescent strip and smoke seals in poor condition
- Combined intumescent strip and smoke seals in good condition
-
If a door closer is fitted does it close the door in a controlled manner fully?
-
Has the closer been adjusted to suit?
- Yes
- No
- Correct adjustment not possible - new closer required
- Correct adjustment not possible - new closer fitted
-
Is ironmongery fitted appropriate and fire rated?
-
Are fire door keep shut or fire door keep lock signs fitted ?
-
Were appropriate signs fitted?
-
Take photo of door both sides
Door 3
-
Door location?
-
Does the door have any markings or certification to confirm a fire door?
-
Is the door a notional fire door?
-
Door thickness?
-
Does the door have any glazing?
-
Is the glazing fire rated (markings)?
-
Is doorset in good condition (damaged, bowed, twisted etc)?
-
What is the issue? (damaged, bowed, twisted etc.)
-
Is the door and frame fitted correctly (door gaps, frame securely fixed etc.)?
-
What is the issue? (gaps over 4mm, frame loose etc)
-
Is fire stopping adequate between frame and supporting construction where visible?
-
Are frame and door stops sized appropriately?
-
Hinge type?
-
Number of hinges?
-
Intumescent strips/smoke seals fitted and in good condition
- No intumescent strips or smoke seals
- Intumescent strips only and in poor condition
- Intumescent strips only and in good condition
- Combined intumescent strip and smoke seals in poor condition
- Combined intumescent strip and smoke seals in good condition
-
If a door closer is fitted does it close the door in a controlled manner fully?
-
Has the closer been adjusted to suit?
- Yes
- No
- Correct adjustment not possible - new closer required
- Correct adjustment not possible - new closer fitted
-
Is ironmongery fitted appropriate and fire rated?
-
Are fire door keep shut or fire door keep lock signs fitted ?
-
Were appropriate signs fitted?
-
Take photo of door both sides
Door 4
-
Door location?
-
Does the door have any markings or certification to confirm a fire door?
-
Is the door a notional fire door?
-
Door thickness?
-
Does the door have any glazing?
-
Is the glazing fire rated (markings)?
-
Is doorset in good condition (damaged, bowed, twisted etc)?
-
What is the issue? (damaged, bowed, twisted etc.)
-
Is the door and frame fitted correctly (door gaps, frame securely fixed etc.)?
-
What is the issue? (gaps over 4mm, frame loose etc)
-
Is fire stopping adequate between frame and supporting construction where visible?
-
Are frame and door stops sized appropriately?
-
Hinge type?
-
Number of hinges?
-
Intumescent strips/smoke seals fitted and in good condition
- No intumescent strips or smoke seals
- Intumescent strips only and in poor condition
- Intumescent strips only and in good condition
- Combined intumescent strip and smoke seals in poor condition
- Combined intumescent strip and smoke seals in good condition
-
If a door closer is fitted does it close the door in a controlled manner fully?
-
Has the closer been adjusted to suit?
- Yes
- No
- Correct adjustment not possible - new closer required
- Correct adjustment not possible - new closer fitted
-
Is ironmongery fitted appropriate and fire rated?
-
Are fire door keep shut or fire door keep lock signs fitted ?
-
Were appropriate signs fitted?
-
Take photo of door both sides
Door 5
-
Door location?
-
Does the door have any markings or certification to confirm a fire door?
-
Is the door a notional fire door?
-
Door thickness?
-
Does the door have any glazing?
-
Is the glazing fire rated (markings)?
-
Is doorset in good condition (damaged, bowed, twisted etc)?
-
What is the issue? (damaged, bowed, twisted etc.)
-
Is the door and frame fitted correctly (door gaps, frame securely fixed etc.)?
-
What is the issue? (gaps over 4mm, frame loose etc)
-
Is fire stopping adequate between frame and supporting construction where visible?
-
Are frame and door stops sized appropriately?
-
Hinge type?
-
Number of hinges?
-
Intumescent strips/smoke seals fitted and in good condition
- No intumescent strips or smoke seals
- Intumescent strips only and in poor condition
- Intumescent strips only and in good condition
- Combined intumescent strip and smoke seals in poor condition
- Combined intumescent strip and smoke seals in good condition
-
If a door closer is fitted does it close the door in a controlled manner fully?
-
Has the closer been adjusted to suit?
- Yes
- No
- Correct adjustment not possible - new closer required
- Correct adjustment not possible - new closer fitted
-
Is ironmongery fitted appropriate and fire rated?
-
Are fire door keep shut or fire door keep lock signs fitted ?
-
Were appropriate signs fitted?
-
Take photo of door both sides
