Title Page
-
Document No.
-
General Inspection
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
Job Briefing
-
Is there a current Job Briefng
-
Has all the hazards been identify
-
Have all signed the Job Briefing
Clearance
-
All have locked onto clearance
-
Are personal keys out of locks
-
Does all personal have tags on them
-
Is a satellite box being used
Confined Space
-
Is the location identified on the Confined Space Form
-
Is the form filled out correctly
-
Is the Attendant present
-
Is the Air Monitor running
-
Are the reading being recorded
-
Is the sign in and out list correct
Hotwork
-
Current Hotwork permit signed and has current date
-
Hotwork is posted in the work area
-
Fire Extinguisher present and has current inspection
-
Work area is clear of hazards
Scaffolding
-
Daily inspection been done
-
Scaffold is in use
-
Tag identifying type of scaffold
-
All rails and toe boards in place per tagging
Aerial Lifts
-
Daily checklist preformed
-
Is fall protection being used
-
Standing on the floor of lift
HOUSEKEEPING
-
Working areas clean
-
Well maintained lay down yards<br>
-
Passageways & Walkways unobstructed
-
Adequate functional lighting
-
Oil and grease removed from floors
-
Outside walkways clear of obstructions
-
Stairs and handrails in place as necessary
-
Condition of breakroom
-
All exits clearly marked and identified
-
Exit lighting properly working
FIRE PREVENTION
-
Fire extinguishers identified and inspected monthly
-
Electrical receptacles covered and operable
-
Access to all Fire Extinguishers is clear/unobstructed
-
Hot work permit is used
HAND TOOLS
-
Neat Storage?
-
Damaged tools repaired or replaced?
POWER TOOLS
-
Tools and cords in good condition?
-
All mechanical safeguards in use?
-
Tools neatly stored when not in use?
-
Right tool being used for the job at hand?
-
GFCIs (Ground Fault Circuit Interrupter) available for electrical tool use?
-
Is all tools with current quarterly inspection?
LADDERS
-
Ladders inspected and in good condition?
-
Properly secured to prevent slipping, sliding, or falling?
-
Using the proper ladder for the job
PERSONAL PROTECTIVE EQUIPMENT
-
Eye protection
-
Face shields
-
Proper hand protection
-
Respirators and masks
-
Head protection
-
Traffic vest and/or high visibility garment
-
Steel toe shoes
-
Personal fall arrest systems
-
Hearing protection
FORKLIFT
-
Forklift meets code?
-
Inspection sheet documented on days used?
-
Is operator using the seat belt
FLAMMABLE GASES & LIQUIDS
-
All flammable containers are clearly identified?
-
Proper storage practices observed?
-
Flammable cabinets in use?
-
Gas cylinders secured upright?
-
Flashback Arrestor in use
-
Flammable storage building
-
LP Tanks
WELDING & CUTTING
-
Screens & Shields present
-
PPE (goggles, gloves, & clothing)
-
Equipment in proper operating condition?
-
Electrical equipment grounded?
-
Power cables protected and in good repair?
-
Fire Extinguishers of proper type nearby?
-
Area clear of fire hazards
-
Flammable material protected?
-
Gas cylinders chained upright?
-
Fuel or oxyacetylene protected and in good condition?<br><br>(Reminder: Oxygen/Acetylene tanks must be stored minimum 12 feet apart when not in use OR have fire proof barrier between the tanks)
-
Are all cylinder caps in place for tanks in storage?
-
Are regulators removed for tanks not in use?
-
LP transfer stations grounding/bonding
Trenching
-
Are Ladders in for trench excavation four feet or greater
-
Is the spoil pile at least two feet back from the edge
-
Is air monitoring being done
-
If excavations is greater then 5 feet then is shoring being used
General Safety Concerns
-
All work being done safely
-
All work being done safely
-
All work being done safely
Closing
-
Select date
-
Add signature