Pneumatic Tube Conveyor Commissioning Document

• Conducted on

  Date

• Prepared by

• Location
  Address

Site Detail

• Client

• Site

• Store number

• Commissioning Engineer

• Tube system type

  ALS 01

  ALS 02

  ALS H36

  ALS MVX One Way

  ALS MVX Two Way

• Tube size

  63mm

  90mm

  110mm

  160mm

  Other

• Add the none standard tube work diameter and wall thickness

System Equipment Detail

• Blower Type

  Select One way 240 volt Two way 240 volt One way 415 volt Two way 415 volt Two way 415 volt with Air Diverter Other

  • One way 240 volt
  • Two way 240 volt
  • One way 415 volt
  • Two way 415 volt
  • Two way 415 volt with Air Diverter
  • Other

• Add the detail of the none standard blower

• Blower location

• Add photos

  Media

• Controller type

  Select ALS 01 ALS 02 ALS H36 ALS MVX One way ALS MVX Two way Other

  • ALS 01
  • ALS 02
  • ALS H36
  • ALS MVX One way
  • ALS MVX Two way
  • Other

• Add the detail of the none standard blower

• Add the MUC I.d Number

• Add the Licence Number

• Controller location

• Add photos

  Media

• Carrier type

• Add photos

  Media

• Send Stations

  Select Sleeve Station Bell Mouth Station Throated Service Pole Cabinet Station Wall Mounted Checkout Station Client Specific Furniture Station Checkout Lid Latch Station Other None

  • Sleeve Station
  • Bell Mouth Station
  • Throated Service Pole
  • Cabinet Station
  • Wall Mounted
  • Checkout Station
  • Client Specific Furniture Station
  • Checkout Lid Latch Station
  • Other
  • None

• Add the detail of the none standard send station

• Receive Stations

  Select Sleeve Station Cabinet Station Receive Flap and Basket Customer specific receiver Other

  • Sleeve Station
  • Cabinet Station
  • Receive Flap and Basket
  • Customer specific receiver
  • Other

• Add the detail of the none standard receive station

• Send / Receive Stations

  Select Sleeve Station Cabinet station Carriage Station None Other

  • Sleeve Station
  • Cabinet station
  • Carriage Station
  • None
  • Other

• Add the detail of the none standard receive station

System Electrical testing

• Type of mains isolator

  240 plug

  240 fused spur

  Temporary power supply

  415 Isolator

• Measure the voltage at the power supply

• Measure the voltage from the out put of the system transformer

• Dc voltage at the controller

• Dc voltage at the furthest station/ device

• Has the transformer been rewired to increase the DC voltage

  Yes

  No

• What was the DC voltage before the adjustments

• Is there an additional power slave/booster pack installed

  Yes

  No

  N/A

• Location

• Dc voltage input

• Device information

Device

• Type of device

  Select Sleeve Station Bell Mouth Station Throated Service Pole Cabinet Station Wall Mounted Checkout Station Client Specific Furniture Station Checkout Lid Latch Station Other None

  • Sleeve Station
  • Bell Mouth Station
  • Throated Service Pole
  • Cabinet Station
  • Wall Mounted
  • Checkout Station
  • Client Specific Furniture Station
  • Checkout Lid Latch Station
  • Other
  • None

• Device Number

• Device location

• Device Valve/ Diverter/ Carriage movements operating correctly

  Yes

  No

  N/A

• Tube switches working correctly

  Yes

  No

  N/A

• L.E.D / Indication lights working correctly

  Yes

  No

  N/A

• Adjoining tube work securely attached

  Yes

  No

  N/A

• Carrier test sends

  Select Empty carrier send Loaded carrier send Multiple carrier send

  • Empty carrier send
  • Loaded carrier send
  • Multiple carrier send

• Loaded carrier travel time in seconds

Whole system settings

• Maximum run time

• Furthest station transaction time

• Full system load and send tested

  Yes

  No

  N/A

• Random load and send tested

  Yes

  No

  N/A

• I the undersigned have carried out the full testing and commissioning of the system detailed in this document and have recorded the results truthfully and to the best of my ability.

  Sign