Pool/Spa Inspection Report

• Inspection No.

• Audit title/property address

• Conducted on

  Date

• Prepared by David Fleming QBCC Lic: 102129 Swimming Pool Safety Inspector Complete Home Inspections Qld P: 0410 369560 E: dave@chiqld.com.au

• Accompanied by

POOL/SPA OWNER DETAILS

• Name of owner(s)

• Postal address (if different from property address)

• Phone/mobile

• Email address

• Assessment No.

POOL/SPA INSPECTION DETAILS

• This inspection date

  Date

• Last inspection date

  Date

• Pool/Spa type

  Select Above ground Below ground

  • Above ground
  • Below ground

• Pool/Spa construction

  Select Concrete Fibreglass Liner Other Spa

  • Concrete
  • Fibreglass
  • Liner
  • Other
  • Spa

• Additional description of pool or spa

• Fence type

  Select Combination Timber Masonary Glass Metal (inc. Colorbond sheets) No Fence

  • Combination
  • Timber
  • Masonary
  • Glass
  • Metal (inc. Colorbond sheets)
  • No Fence

• Fence height 1200mm or higher, near vertical or not leaning towards the pool/spa area by more than 15 degrees to the vertical

  Yes

  No

  N/A

• Gate(s) opening direction away from the pool/spa area

  Yes

  No

  N/A

• Gate(s) self-closing and self-latching from any position when opened (including when resting on the latch)

  Yes

  No

  N/A

• Adjoining structures to the pool/spa barrier to be non climbable or not within a 1200mm radius of the pool/spa barrier

  Yes

  No

  N/A

• Latch height at 1500mm or shielded 450mm from latch (no gaps of more than 10mm within the shielded area) and/or at least 150mm below the top of the gate

  Yes

  No

  N/A

• Lowest horizontal member to be at least 1100mm from top of fence and not less than 1400mm from the latch

  Yes

  No

  N/A

• Height under gate and fence less than 100mm and has a stable surface that cannot be eroded by weather, children or animals

  Yes

  No

  N/A

• Distance between vertical (|) members less than 100mm

  Yes

  No

  N/A

• Distance between horizontal (-) members no less than 900mm apart if greater than 10mm either in depth or protrusion

  Yes

  No

  N/A

• No foot or hand holds (BBQ's, garden retaining walls, garden furniture, water features/ornaments, trees/shrubs) within a 1200mm radius on the outside of the fence or 300mm from the inside of the fence

  Yes

  No

  N/A

• Stability/durability of barrier compliant

  Yes

  No

  N/A

• Any window less than 2400mm to the ground to be either covered by bars or mesh or unable to open more than 100mm

  Yes

  No

  N/A

• Door self-closing and self-latching from any position when opened (including when resting on the latch) or permanently fixed using a device other than a key locking mechanism<br>NOTE: ONLY APPLICABLE TO POOLS AND/OR SPAS APPROVED PRIOR TO 5 NOVEMBER 2001

  Yes

  No

  N/A

• Retaining wall(s) compliant (high side 2400mm and low side 1200mm)

  Yes

  No

  N/A

• Balcony height less than 2400mm to the finished ground level still compliant

  Yes

  No

  N/A

• Pool/Spa barrier compliant

  Yes

  No

  N/A

• Instructions to rectify compliance issues

• Notes

• Other photos

  Media

• Follow up inspection required

  Yes

  No

  N/A

• Owner/occupier home

  Select Yes No, prior permission granted No, calling card left Property unoccupied

  • Yes
  • No, prior permission granted
  • No, calling card left
  • Property unoccupied

• Please call, text or email inspector on 0410 369560 or dave@chiqld.com.au when compliance issues are rectified. Thank you.

• This Pool/Spa Inspection Report is issued under Section 53 of the Building Regulations 2012.
  
  Any swimming pool or spa must have suitable barriers or safety fencing in accordance with the Building Act 2011, the Building Regulations Act 2012 and the Australian Standards AS 1926.1 & .2 - 2007, so as to restrict the access by young children.
  
  .
  
  .

• Issuing Officer

  Sign