Title Page
-
Site conducted
-
Conducted on
-
Prepared by
-
Location
-
Work Order Number
Untitled Page
(T)ools, (S)afety Equipment and (M)aterials
-
Electrician's tool set
-
Cleaning material and touch up paint
Safety Guidelines
-
Follow site safety procedures and your supervisor's instructions
-
High voltage is present inside the uninterruptible power supply cabinet. Contact with energized circuits may result in death. Use extreme caution when working with energized circuits
-
Consult manufacturer's operations and maintenance manuals while conducting this maintenance task
-
Record results in the equipment log
Maintenance Procedures
-
Remove covers and inspect for signs of overheating, cracks, or looseness
-
Inspect batteries and battery connections for leaks, overheating, or corrosion. Clean and tighten as necessary
-
Clean air intakes. Clean or replace air filters
-
Replace indicating lamps, etc as necessary
-
Perform spot cleaning and touchup painting as required
-
Perform operational test. Simulate power failure and checking for proper response
-
Evaluate batteries for replacement by completing the required raise/lower test cycles under battery years
-
Verify no alarm conditions
Maintenance Hours
-
How much time was spent on this work order?