Information

  • Document No.

  • Client / Site

  • Conducted on

  • Prepared by

General introduction

  • Has this site got an internal DX plantroom

Plantroom

  • Pipe penetrations are they sleeved or insulated and what with ?

  • Pipe penetrations through floors are they well insulated

  • Braided hoses, are they free of any rubbing and secured?

  • Any hydrozorb clamps loose

  • Does the DX pack have HP or LP switches fitted to each compressor

  • Check all switches are clear of potential leaks/fracture points (report any potential issues)

  • Is the pack supplied by PR Products

  • Take pictures how HP switches are mounted to the compressor. (Example below)

    HP Switch.png
  • Add photos

  • Are all switches free from potential leaks/fracture points (Example picture below) Take pictures how HP switches are mounted to the compressor.

  • Do compressors have rotalocks?

  • Are all rotalocks tight and free of leaks?

  • Does this site have a valve header station ?

  • Any hydrozorb clamps loose. any vibration on pipework due to loose clamps

  • Pipe penetrations through floors are they insulated and what with ?

  • Pipe penetrations in general are they sleeved or insulated and what with ?

  • Does this site have any remote condensers

Condensers

  • Pipe penetrations are they sleeved or insulated and what with ?

  • Any plant/packs hydrozorb clamps loose. any vibration on pipework due to loose clamps

  • Pipe penetrations through floors are they well insulated

  • Does this site have any water chillers ?

Chillers

  • Does this site have dry air coolers ?

  • Please select generation type

  • Test pump change over

  • Please state number of pumps on site

  • Check pressurisation unit and record the water litres used

  • Is the glycol level correct ?

  • Is there any evidence of any glycol leaks ?

  • Check the expansion level ?

  • Pipe penetrations are they sleeved or insulated and what with ?

  • Pipe penetrations through floors are they well insulated

  • Any hydrozorb clamps loose. any vibration on pipework due to loose clamps

Coldrooms back of house

  • Pipe penetrations are they sleeved or insulated and what with ?

  • Pipe penetrations through floors are they well insulated

  • Any hydrozorb clamps loose

High level pipework

  • Warehouse pipe work on tray/hangers properly supported

  • Any evidence of rubbing of services on traywork

  • Are pipework hangers insulated and what with ?

  • Check high level ball valves where possible

Shop floor

  • Pipework on top of cases/islands secured with no movement, case entry points protected

  • Show tops of cases how pipes are supported

  • Pipework below cases secured with no movement, case entry points protected

  • Add date and time

  • Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.