Title Page
-
Conducted on
-
Prepared by
-
Location
-
Are cables correctly segregated i.e Class 1/ Class 2 in accordance with BS7671
-
Has correct fire alarm isolator been installed to conform with BS5839
-
Has minor works/ installation certificate been reviewed
-
Does information provided on electrical minor works/ installation certificate satisfy
-
Have correct connector blocks been used to conform with BS5839 i.e Porcelain connectors
-
Have Resistors, fly cables been soldered to provide a reliable and durable method of connection
-
Are newly installed cables correctly supported throughout there run i.e by the use of appropriate fixings such as D clips.
-
Has containment been installed correctly using appropriate bends/ accessories
-
Is all new associated equipment labelled with a durable stick on permeant labels (DYMO type)
-
Has fire alarm fault signal been wired into Dual Com confirm signal.
- Yes
- No
- N/A
-
Has signal been received from monitoring service
-
Has Dual Com Aerial been installed external to block
-
Has telephone line been extended and wired through Dual Com using appropriate connectors such as jelly connector and connections are labelled at junction/ connection locations.
-
Have we received/ reviewed panel download following completions of fire alarm installation/ modification.
-
Has appropriate Fire Alarm certification been received / reviewed
-
Does information provided on fire alarm certification satisfy
-
Have Installation instructions been left in log book on site
-
Confirm fire alarm activation has been received ( Enter time/ Date received )
-
Confirm what signal was received
-
Confirm fire alarm fault activation has been received ( Enter time/ Date received )
-
Confirm what signal was received
-
Confirm BT line failure ( Enter time/ Date received )
-
Confirm what signal was received
