Rigging Hardware and Slings Monthly Inspection

• Site conducted

  Select

• Document No.

• Audit Title

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

• Rigging Hardware & Slings Inspection

undefined

• Yes

  No

  N/A
Inspection of Rigging Hardware

INSPECTION FREQUENCY PER ASME B30.26 A VISUAL INSPECTION SHALL BE PERFORMED BY THE USER OR DESIGNATED PERSON EACH DAY BEFORE THE RIGGING HARDWARE IS USED. A PERIODIC INSPECTION SHALL BE PERFORMED BY A DESIGNATED PERSON, AT LEAST ANNUALLY. THE RIGGING HARDWARE SHALL BE EXAMINED AND A DETERMINATION MADE AS TO WHETHER THEY CONSTITUTE A HAZARD. WRITTEN RECORDS ARE NOT REQUIRED. SEMI-PERMANENT AND INACCESSIBLE LOCATIONS WHERE FREQUENT INSPECTIONS ARE NOT FEASIBLE SHALL HAVE PERIODIC INSPECTIONS PERFORMED.

Rigging Hardware Serial Number:

• Rigging Hardware Serial Number:

• Photo:

  Media
• Location:
  Address

• REJECTION CRITERIA PER ASME B30.26-2014

• MISSING OR ILLEGIBLE MANUFACTURER’S NAME OR TRADEMARK AND/OR RATED LOAD IDENTIFICATION (OR SIZE AS REQUIRED).

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• A 10% OR MORE REDUCTION OF THE ORIGINAL DIMENSION

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• EXCESSIVE NICKS, GOUGES, PITTING AND CORROSION

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• BENT, TWISTED, DISTORTED, STRETCHED, ELONGATED, CRACKED OR BROKEN LOAD BEARING COMPONENTS

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• INDICATIONS OF HEAT DAMAGE INCLUDING WELD SPATTER OR ARC STRIKES, EVIDENCE OF UNAUTHORIZED WELDING

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• LOOSE OR MISSING NUTS, BOLTS, COTTER PINS, SNAP RINGS, OR OTHER FASTENERS AND RETAINING DEVICES

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• UNAUTHORIZED REPLACEMENT COMPONENTS OR OTHER VISIBLE CONDITIONS THAT CAUSE DOUBT AS TO THE CONTINUED USE OF THE SLING

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

ADDITIONALLY INSPECT WIRE ROPE CLIPS FOR:

• 1. INSUFFICIENT NUMBER OF CLIPS<br>2. INCORRECT SPACING BETWEEN CLIPS<br>3. IMPROPERLY TIGHTENED CLIPS<br>4. INDICATIONS OF DAMAGED WIRE ROPE OR WIRE ROPE SLIPPAGE<br>5. IMPROPER ASSEMBLY

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

ADDITIONALLY, INSPECT WEDGE SOCKETS FOR:

• 1. INDICATIONS OF DAMAGED WIRE ROPE OR WIRE ROPE SLIPPAGE<br>2. IMPROPER ASSEMBLY

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

ADDITIONAL REJECTION CRITERIA PER ASME B30.10 - HOOKS:

• ANY VISIBLY APPARENT BEND OR TWIST FROM THE PLANE OF THE UNBENT HOOK

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• ANY DISTORTION CAUSING AN INCREASE IN THROAT OPENING OF 5%, NOT TO EXCEED 1/4”

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• MISSING OR ILLEGIBLE RATED LOAD IDENTIFICATION.

  Yes

  No

• Notes:Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• MISSING OR ILLEGIBLE HOOK MANUFACTURER’S IDENTIFICATION OR SECONDARY MFG. IDENTIFICATION

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• Rigging Hardware & Sling Inspection

Inspection of Slings

• INSPECTION FREQUENCY PER ASME B30.9
  A VISUAL INSPECTION FOR DAMAGE SHALL BE PERFORMED BY THE USER OR DESIGNATED PERSON EACH DAY OR SHIFT THE SLING IS USED. A COMPLETE INSPECTION FOR DAMAGE SHALL BE PERFORMED PERIODICALLY BY A DESIGNATED PERSON, AT LEAST ANNUALLY.
  WRITTEN RECORDS OF MOST RECENT PERIODIC INSPECTION SHALL BE MAINTAINED.

Sling Serial Number:

• Sling Serial Number:

• Photo:

  Media
• Location:
  Address

• REJECTION CRITERIA PER ASME B30.9
  MISSING OR ILLEGIBLE SLING IDENTIFICATION; EVIDENCE OF HEAT DAMAGE; SLINGS THAT ARE KNOTTED; FITTINGS THAT ARE PITTED, CORRODED, CRACKED, BENT, TWISTED, GOUGED, OR BROKEN; OTHER CONDITIONS, INCLUDING VISIBLE DAMAGE, THAT CAUSE DOUBT AS TO THE CONTINUED USE OF THE SLING.

WIRE ROPE SLINGS

• EXCESSIVE BROKEN WIRES, FOR STRAND-LAID AND SINGLE PART SLINGS, TEN RANDOMLY DISTRIBUTED BROKEN WIRES IN ONE ROPE LAY OR FIVE BROKEN WIRES IN ONE STRAND IN ONE ROPE LAY

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• SEVERE LOCALIZED ABRASION OR SCRAPING, KINKING, CRUSHING, BIRDCAGING

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• ANY OTHER DAMAGE RESULTING IN DAMAGE TO THE ROPE STRUCTURE

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• SEVERE CORROSION OF THE<br>ROPE OR END ATTACHMENTS

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

CHAIN SLINGS

• CRACKS OR BREAKS

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• EXCESSIVE WEAR, NICKS OR GOUGES

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• STRETCHED CHAIN LINKS OR COMPONENTS

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• BENT, TWISTED OR DEFORMED CHAIN LINKS OR COMPONENTS

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• EXCESSIVE PITTING OR CORROSION

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• LACK OF ABILITY OF CHAIN OR COMPONENTS TO HINGE FREELY

  Yes

  No

• Notes: Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• WELD SPATTER

  Yes

  No

• Notes:

WEB SLINGS

• ACID OR CAUSTIC BURNS

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• MELTING OR CHARRING OF ANY PART OF THE SLING

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• HOLES, TEARS, CUTS, ABRASIVE WEAR OR SNAGS THAT EXPOSE THE CORE YARNS

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• BROKEN OR WORN STITCHING IN LOAD BEARING SPLICES

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• EXCESSIVE ABRASIVE WEAR

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• DISCOLORATION AND BRITTLE OR STIFF AREAS ON ANY PART OF THE SLING, WHICH MAY MEAN CHEMICAL OR ULTRAVIOLET / SUNLIGHT DAMAGE

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

ROUND SLINGS

• ACID OR CAUSTIC BURNS

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• EVIDENCE OF HEAT DAMAGE

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• HOLES, TEARS, CUTS, ABRASIVE WEAR OR SNAGS THAT EXPOSE THE CORE YARNS

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• BROKEN OR DAMAGED CORE YARNS

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• WELD SPATTER THAT EXPOSES CORE YARNS

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• DISCOLORATION AND BRITTLE OR STIFF AREAS ON ANY PART OF THE SLINGS, WHICH MAY MEAN CHEMICAL OR OTHER DAMAGE

  Yes

  No

• Equipment MUST be taken "Out Of Service" until repair/replacement can be performed.

• Add signature

  Sign

• Yes

  No

  N/A