Information
-
Engineer details (inc payroll no or engineer number)
-
Prepared by
-
Conducted on
-
Job No
-
Location
TM RISK ASSESSMENT
Important Notice; This document is to be completed whilst attending every scheduled customer visit.
-
Visit type booked
- Service
- Install
- Install (multi-room)
- MHO
- MHO (multi-room)
- Other
-
Type of work to be carried out on site
- Pitch roof working
- Flat Roof working
- Double section ladder
- Dormer roof working
- Triple section ladder working
- Single section Ladder working
- Combi-ladder working
- No ladder
No Ladder Required
-
Have all possible risks been identified and recorded on the the MFT, prior to carrying out any work?
-
Has all the required PPE equipment been used in accordance to Sky's health and safety guidelines?
-
What is the reason no ladders are needed?
-
Has the cabling been clipped and run in accordance to Sky's expected standards? (Including F-Connectors)
-
Add photos to demonstrate this
-
Have all holes that were needed to be drilled, completed in accordance to Sky's recommended guidelines? (Where applicable were the holes sealed, grommets and brick burst plates used and the Bosch pipe detector used)
-
Add photos to demonstrate this
-
Optional; Engineer comments on visit.
Email a copy of this document; to your Team Manager. Ensure you enter the engineers payroll number in the subject line. A copy can be stored in your iBooks on your iPad for future reference (see iAuditor 'how to' for support)
Combi-ladder
-
Have all possible risks been identified and recorded on the the MFT, prior to carrying out any work?
-
Has all the required PPE equipment been used in accordance to Sky's health and safety guidelines?
-
Have the ladders been set up in a accordance to Sky's working at heights requirements?
-
Add photos to show the ladder set up using the required fall arrest equipment and eyebolts.
-
Has the dish been assembled and installed in accordance to Sky's expected standards?
-
Add photos to support this.
-
Has the cabling been clipped and run in accordance to Sky's expected standards? (Including F-Connectors)
-
Add photos to demonstrate this
-
Have all holes that were needed to be drilled, completed in accordance to Sky's recommended guidelines? (Where applicable were the holes sealed, grommets and brick burst plates used and the Bosch pipe detector used)
-
Add photos to demonstrate this
-
Optional; Engineer comments on visit.
Email a copy of this document; to your Team Manager. Ensure you enter the engineers payroll number in the subject line. A copy can be stored in your iBooks on your iPad for future reference (see iAuditor 'how to' for support)
Single section ladder
-
Have all possible risks been identified and recorded on the the MFT, prior to carrying out any work?
-
Has all the required PPE equipment been used in accordance to Sky's health and safety guidelines?
-
Have the ladders been set up in a accordance to Sky's working at heights requirements?
-
Add photos to show the ladder set up using the required fall arrest equipment and eyebolts.
-
Has the dish been assembled and installed in accordance to Sky's expected standards?
-
Add photos to support this.
-
Has the cabling been clipped and run in accordance to Sky's expected standards? (Including F-Connectors)
-
Add photos to demonstrate this
-
Have all holes that were needed to be drilled, completed in accordance to Sky's recommended guidelines? (Where applicable were the holes sealed, grommets and brick burst plates used and the Bosch pipe detector used)
-
Add photos to demonstrate this
-
Optional; Engineer comments on visit.
Email a copy of this document; to your Team Manager. Ensure you enter the engineers payroll number in the subject line. A copy can be stored in your iBooks on your iPad for future reference (see iAuditor 'how to' for support)
Double Section ladder
-
Have all possible risks been identified and recorded on the the MFT, prior to carrying out any work?
-
Has all the required PPE equipment been used in accordance to Sky's health and safety guidelines?
-
Have the ladders been set up in a accordance to Sky's working at heights requirements?
-
Add photos to show the ladder set up using the required fall arrest equipment and eyebolts.
-
Has the dish been assembled and installed in accordance to Sky's expected standards?
-
Add photos to support this.
-
Has the cabling been clipped and run in accordance to Sky's expected standards? (Including F-Connectors)
-
Add photos to demonstrate this
-
Have all holes that were needed to be drilled, completed in accordance to Sky's recommended guidelines? (Where applicable were the holes sealed, grommets and brick burst plates used and the Bosch pipe detector used)
-
Add photos to demonstrate this
-
Optional; Engineer comments on visit.
Email a copy of this document; to your Team Manager. Ensure you enter the engineers payroll number in the subject line. A copy can be stored in your iBooks on your iPad for future reference (see iAuditor 'how to' for support)
Pitch Roof Working
-
Have all possible risks been identified and recorded on the the MFT, prior to carrying out any work?
-
Has all the required PPE equipment been used in accordance to Sky's health and safety guidelines?
-
Have the ladders been set up in a accordance to Sky's working at heights requirements?
-
Add photos to show the ladder set up using the required fall arrest equipment and eyebolts.
-
Has the dish been assembled and installed in accordance to Sky's expected standards?
-
Add photos to support this.
-
Has the cabling been clipped and run in accordance to Sky's expected standards? (Including F-Connectors)
-
Add photos to demonstrate this
-
Have all holes that were needed to be drilled, completed in accordance to Sky's recommended guidelines? (Where applicable were the holes sealed, grommets and brick burst plates used and the Bosch pipe detector used)
-
Add photos to demonstrate this
-
Optional; Engineer comments on visit.
Email a copy of this document; to your Team Manager. Ensure you enter the engineers payroll number in the subject line. A copy can be stored in your iBooks on your iPad for future reference (see iAuditor 'how to' for support)
Flat Roof Working
-
Have all possible risks been identified and recorded on the the MFT, prior to carrying out any work?
-
Has all the required PPE equipment been used in accordance to Sky's health and safety guidelines?
-
Have the ladders been set up in a accordance to Sky's working at heights requirements?
-
Add photos to show the ladder set up using the required fall arrest equipment and eyebolts.
-
Has the dish been assembled and installed in accordance to Sky's expected standards?
-
Add photos to support this.
-
Has the cabling been clipped and run in accordance to Sky's expected standards? (Including F-Connectors)
-
Add photos to demonstrate this
-
Have all holes that were needed to be drilled, completed in accordance to Sky's recommended guidelines? (Where applicable were the holes sealed, grommets and brick burst plates used and the Bosch pipe detector used)
-
Add photos to demonstrate this
-
Optional; Engineer comments on visit.
Email a copy of this document; to your Team Manager. Ensure you enter the engineers payroll number in the subject line. A copy can be stored in your iBooks on your iPad for future reference (see iAuditor 'how to' for support)
Dormer Roof Working
-
Have all possible risks been identified and recorded on the the MFT, prior to carrying out any work?
-
Has all the required PPE equipment been used in accordance to Sky's health and safety guidelines?
-
Have the ladders been set up in a accordance to Sky's working at heights requirements?
-
Add photos to show the ladder set up using the required fall arrest equipment and eyebolts.
-
Has the dish been assembled and installed in accordance to Sky's expected standards?
-
Add photos to support this.
-
Has the cabling been clipped and run in accordance to Sky's expected standards? (Including F-Connectors)
-
Add photos to demonstrate this
-
Have all holes that were needed to be drilled, completed in accordance to Sky's recommended guidelines? (Where applicable were the holes sealed, grommets and brick burst plates used and the Bosch pipe detector used)
-
Add photos to demonstrate this
-
Optional; Engineer comments on visit.
Email a copy of this document; to your Team Manager. Ensure you enter the engineers payroll number in the subject line. A copy can be stored in your iBooks on your iPad for future reference (see iAuditor 'how to' for support)
Triple Section ladder
-
Has the cabling been clipped and run in accordance to Sky's expected standards? (Including F-Connectors)
-
Have all possible risks been identified and recorded on the the MFT, prior to carrying out any work?
-
Has all the required PPE equipment been used in accordance to Sky's health and safety guidelines?
-
Have the ladders been set up in a accordance to Sky's working at heights requirements?
-
Add photos to show the ladder set up using the required fall arrest equipment and eyebolts.
-
Has the dish been assembled and installed in accordance to Sky's expected standards?
-
Add photos to support this.
-
Has the cabling been clipped and run in accordance to Sky's expected standards? (Including F-Connectors)
-
Add photos to demonstrate this
-
Have all holes that were needed to be drilled, completed in accordance to Sky's recommended guidelines? (Where applicable were the holes sealed, grommets and brick burst plates used and the Bosch pipe detector used)
-
Add photos to demonstrate this
-
Optional; Engineer comments on visit.
Email a copy of this document; to your Team Manager. Ensure you enter the engineers payroll number in the subject line. A copy can be stored in your iBooks on your iPad for future reference (see iAuditor 'how to' for support)
-
Engineer Name, Tech Number