Information

  • Location

  • Conducted on

  • Prepared by

  • Bay / Area
  • Unplug power cord from power supply before inspecting, adjusting, removing or replacing parts.

  • Is cord free from damage - check for any cuts, fraying, burned jackets, exposed wire, etc. If no - TAG AND REMOVE FROM SERVICE.

  • Is handle secured in place?

  • Does the maximum RPM rating of the grinder meet or fall below the RPM rating on wheel (cannot exceed)?

  • Wheel guard is firmly in place?

  • Trigger safety mechanism functional?

  • Wheel is free of cracks, chips, gouges or other damage?

  • Flange nuts and flanges in good condition and suit the wheel?

  • Add signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.