Title Page
-
Site conducted
-
Conducted on
-
Prepared by
-
Location
Raw Material Incline Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Under Hog Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Raw Material Bin Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Raw Material Bin Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Raw Hair Incline Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Hydrolysed Hair Collect Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Dried Blood Collection Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Over Cooker Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Coagulated Blood Bin Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Coagulated Blood Bin Feed Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Surge Bin Feed Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Dried Blood Incline Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Blood Mill
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Under Mill Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Meal Bin Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Under Hammer Mill Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Incline Meal Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Bulk outloading screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Screened Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Return Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Under Mill Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Cake Bin Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Cake Bin Level Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Cake floor Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Press Tallow Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Crude Tallow
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
EQUA Cooker
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Surge Bin Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Fines Screw Return
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Press Feed Screw #1
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Press Feed Screw #2
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Cake Incline Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
Raw Material Receiving Screw
-
Are there any areas where employees can access the moving screw with parts of their body?
-
How are the current guards attached?
-
Are there any areas where product can block requiring screws to be stopped and cleaned? If so, what procedures are in place to stop employees placing hands etc into moving screws?
-
Are E Stops / E Lanyards near where guards can be removed? (This ensures that it easy to stop the screw for isolation or emergency)
-
Are there any inspection covers? If yes, how are these secured?
-
Does no one have access to the screw during production?
-
Who cleans the screw?
-
What controls are in place to ensure the screw is stopped if the guard is removed?
-
Are there any safety interlocks on any part of the screw? Should there be?
- Isolation switch for motor on casing and isolation in power board
-
What improvements could be considered as part of this inspection/ review?
