Inspection Policy (PMP)

Standing rigging inspections will be done by the master of vessel, at intervals of once a week with weather conditions permitting for the safety of the inspector aloft. The inspection will include all terminals, chain plates, chain plate bolts, gooseneck, tangs, fittings, pins, and cotter pins. During inspection, cleaning and polishing will be done to insure any abnormalities or deformities will be easier to see with the aid of magnafine glass. All results of inspection will be noted in the rigging logbook. Any abnormalities will be noted and photograph and forwarded to professional rigging inspector for analysis and for his inspection if need or a replacement installed with suspect item sent out for his inspection, and noted in rigging log. At once a month interval with above inspection, the running rigging will be inspected including the winches, blocks, shackles, and pad eyes, with all findings or replacements will be noted and log in the rigging log book. At a period of once a year a rigging survey will be performed by a third party rigger with all findings kept on file and noted in rigging log. All wire and fittings replacements will be done at the prescribe intervals set forth by the rules of the CFR’s and USCG MSO.

Audit

Sea Maui Aux Sailing vessel standing and running rigging Information and index.

TYPE: Catamaran
OFFICIAL # REGISTRATION: 976286
LOA: 51' BEAM: 28' DEPTH: 8'
TONNAGE NET/GROSS: 22/24-simplified
SAIL AREA: Main Jib
RIG TYPE: Fractional
MAST TYPE: ALUMINUM BUILDER:
SECTION / SEAMS / TAPER: No seams No taper ????' x ????’ Mast ?????'
STEP/PARTNERS: Deck Step
AGE: 1991
LAST MAST STEP INSPECTION: Sept 2016

BOOM TYPE: ALUMINUM BUILDER:??????? GOOSENECK: 1 Aluminum
AGE: ??????
OUTHAUL/S: ???????
SPREADERS TYPE: Swept
ROOTS/BRACKETS: Brackets
SPREADER TIPS: Continuous, Double Diamond Terminates @ mast.

Is this the vessel being inspected

STANDING RIGGING

FORESTAY
WIRE TYPE/ DIAMETER: 1x19 1/2"
TERMINALS ALOFT/ TERMINALS ALOW: Swedge eye aloft Swedge stud alow
CLEVIS PIN:Aloft 7/8’ X 2 & 7/8 X 3 Alow 7/8 x 2.5 Age: 2017
LENGTH: 49"2'

UPPER CAP SHROUD PORT
WIRE TYPE/ DIAMETER: 1x19 1/2
TERMINALS ALOFT/ TERMINALS ALOW: Swedge eye aloft Swedge stud alow
CLEVIS PIN: 7/8’X 2' & 7/8 x 3' Age: 2017
LENGTH: 48"7'

UPPER CAP SHROUD STARBOARD
WIRE TYPE/ DIAMETER: 1x19 1/2
TERMINALS ALOFT/ TERMINALS ALOW: Swedge eye aloft Swedge stud alow
CLEVIS PIN: 7/8 X 2' & 7/8 x 3 Age: 2017
LENGHT:48"7'

UPPER DIAMOND PORT
WIRE TYPE/ DIAMETER: 1/19 x 8mm
TERMINALS ALOFT/ TERMINALS ALOW: Swedge eye aloft Swedge stud alow
CLEVIS PIN: 1/2' X 1 1/2' Age: 2017
LENGTH: 12"3'

UPPER DIAMOND STARBOARD
WIRE TYPE/ DIAMETER:1/19 8mm
TERMINALS ALOFT/ TERMINALS ALOW: Swedge eye aloft Swedge stud alow
CLEVIS PIN: 1/2' X 1 1/2' Age: 2017
LENGTH: 12"3'

LOWER DIAMOND PORT
WIRE TYPE/ DIAMETER: 1/19 x 8mm
TERMINALS ALOFT/ TERMINALS ALOW: Swedge eye aloft Swedge stud alow
CLEVIS PIN: 1/2' X 1 1/2' Age: 2017
LENGTH: 12"3'

LOWER DIAMOND STARBOARD
WIRE TYPE/ DIAMETER:1/19 8mm
TERMINALS ALOFT/ TERMINALS ALOW: Swedge eye aloft Swedge stud alow
CLEVIS PIN: 1/2' X 1 1/2' Age: 2017
LENGTH: 12"3'

JUMPER
WIRE TYPE/ DIAMETER: 1/19 8mm
TERMINALS ALOFT/ TERMINALS ALOW: Swedge J Hook Aloft Swedge stud below
CLEVIS PIN: 1/2' X 1 1/2' Age: 2017
LENGTH: 43"8'
STRIKER CLEVIS: 3/4 X 2 (inboard) 7/8 X 2 (crossbar) 7/8 X 3 Terminal Eye

FURLER
LOCATION:Forward Cross Bar
TYPE:Harken
UNIT CONDITION/COMMENTS
AGE: 2016

CHAIN PLATE LOCATION: Starboard side midship SIZE : 1/2 inch thick by 2 inch wide by 43 inches length 20 degree bend 34 inches up from the bottom. SECURED : 6 threw bolts 5/8 inch to a backing plate inside hull. AGE: 2016

CHAIN PLATE LOCATION: Port side midship SIZE : 1/2 inch thick by 2 inch wide by 43 inches length 20 degree bend 34 inches up from the bottom SECURED: 6 threw bolts 5/8 inch to a backing plate inside hull AGE : 2016

RUNNING RIGGING

MAINSHEET
TYPE:Dacron, Yacht Braid SIZE:5/8in LENGTH:78ft Age: 2016

JIB SHEET PORT
TYPE: Dacron,Yacht Braid SIZE: 1/2in LENGTH:34ft Age: 2016

JIB SHEET STARBOARD
TYPE: Dacron,Yacht Braid SIZE: 1/2in LENGTH:34ft Age: 2016

TRAVELR SHEET PORT & STRBD
TYPE:Dacron, Yacht Braid SIZE:3/8 LENGTH:52ft each side
Age: 2015

FURLER CONTROL LINE
TYPE:Dacron, Yacht Braid SIZE:3/8in LENGTH: 84 ft
Age: 2017

JIB HALYARD
TYPE: Dacron, Yacht Braid SIZE: 5/8in LENGTH:130'
Age:2017

MAIN HALYARD
TYPE: Dacron, Yacht Braid SIZE: 3/4 in LENGTH:150'
Age: 2016

SPINAKER HALYARD
TYPE:Dacron, Yacht Braid SIZE:5/8in LENGTH:170ft
Age: 2019

TOPPING LIFT
TYPE:Dacron, Yacht Braid SIZE:1/2in LENGTH:130ft
Age: 2016

OUTHAUL
TYPE: Dacron ,Yacht Braid SIZE: 5/8 in
LENGTH: ??
AGE: 2016

1ST REEF
TYPE: Dacron ,Yacht Braid SIZE: 5/8 in
LENGTH:48 ft
AGE: 2016

2ND REEF
TYPE: Dacron ,Yacht Braid SIZE:5/8 in
LENGTH:48 ft
AGE:2016

COMMENTS

WINCHES

MAIN SHEET WINCH
TYPE: Harken 40 SPEED: 2 Age 2017

JIB SHEET PORT WINCH
TYPE:Harken 50 SPEED: 2 Age: 2016

JIB SHEET STRBD WINCH
TYPE: Harken 50 SPEED: 2 Age: 2016

JIB HALYARD/TOPPING LIFT WINCH
TYPE: Lewmar 44 SPEED: 2 Age 2009

SPINNAKER/LADDER WINCH
TYPE: Lewmar 44 SPEED: 2 Age:2009

MAIN HALYARD TYPE: Harken 46 SPEED: 2 power ratio. Age : 2014

TRAVLER WINCH Port Side TYPE:Barient 21-33 SPEED: 2 Age: 2009

TRAVLER WINCH Starboard side TYPE: Harken 20 SPEED: 1 AGE: 2017

COMMENTS

INSPECTOR SIGNATURE, CONFIRMING INSPECTION WAS CARRIED OUT.
Please note that this checklist is a hypothetical example and provides basic information only. It is not intended to take the place of, among other things, workplace, health and safety advice; medical advice, diagnosis, or treatment; or other applicable laws. You should also seek your own professional advice to determine if the use of such checklist is permissible in your workplace or jurisdiction.