Title Page
-
Site conducted
-
Conducted on
-
The tool I am using is
- 1 Belt sander Makita 240v
- 2 Planer Makita 240v
- 3 Battery planer Makita
- 4 Multi tool Makita 240v
- 5 Battery Multi tool Makita
- 6 Battery Leaf blower Makita
- 7 PAT tester
- 8 Battery reciprocating saw Makita
- 9 Battery Jigsaw Makita
- 10 Jigsaw Makita 240v
- 11 Battery Circular saw Makita
- 12 Erbauer tile cutter
- 13 Battery Disk cutter/angle grinder Makita
- 14 Square Sander Makita 240v
- 15 Square Sander Makita 240v
- 16 Orbital sander Makita 240v
- 17 Battery SDS drill Makita
- 18 Titan Circular saw 240v
- 19 Bosch SDS drill 240v
- 20 Screw gun Makita
- 21 Titan Diamond drill bits
- 22 Heat gun DeWalt
- 27 Rotozip 240v
- 28 Router Hitchi 240v
- 29 Router Makita 240v
- 30 Router Trend 110v
- Disk cutter/angle grinder Hitachi 240v (Stored in shed)
- Table Router
- Breaker (Stored in shed)
- OLD Battery SDS drill Makita used as a BREAKER (Stored in Workshop)
- DeWalt Crosscut Mitre/Chop saw (Stored in 13 Lathbury Garage)
- Crosscut Mitre/Chop saw Makita. In workshop
- Metabo Planer
- Record Power Polisher
- Record Power Grinder
- Mortiser
- Band Saw
- Table Saw
- Gutter Cleaning Vac
- Makita battery 18v Number 1
- Makita battery 18v Number 2
- Makita battery 18v Number 3
- Makita battery 18v Number 4
- Makita battery 18v Number 5
- Makita battery 18v Number 6
- Makita battery 18v Number 7
- Makita battery 18v Number 8
- Makita battery 18v Number 9
-
Belt sander
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this sander
-
Has the sander been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the sander
-
Is the wheel sharp well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Planer 240v
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this Planer
-
Has the Planer been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Planer
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Planer Battery
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this Planer
-
-
Are you wearing the correct PPE for the use of the Planer
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Multi tool 240v
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this Multi tool
-
Has the Multi tool been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Multi tool
-
Is the blade sharp and well maintained
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Battery Multi tool Makita
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this Multi tool
-
-
Are you wearing the correct PPE for the use of the Multi tool
-
Is the blade sharp and well maintained
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Leaf blower
-
-
By continuing with this sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this Leaf blower
-
-
Are you wearing the correct PPE for the use of the Leaf blower
-
Is the filter and extraction clean, clear, attached and working correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
PAT tester
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tester
-
Has the PAT tester been calibrated in the last year and have you undertaken a visual on any wiring before the time of use.
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Battery reciprocating saw Makita
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this reciprocating saw
-
-
Are you wearing the correct PPE for the use of the reciprocating saw
-
Is the blade sharp and well maintained
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Jigsaw Battery
-
-
By continuing with this sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this Jigsaw
-
-
Are you wearing the correct PPE for the use of the Jigsaw
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Jigsaw Makita 240v
-
-
By continuing with this sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this Jigsaw
-
-
Are you wearing the correct PPE for the use of the Jigsaw
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Battery Circular saw Makita
-
-
By continuing with this sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this Circular saw
-
-
Are you wearing the correct PPE for the use of the Circular saw
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
tile cutter
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this tile cutter
-
Has the tile cutter been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the tile cutter
-
Is the blade or wheel well maintained and in good condition
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Battery Disk cutter/angle grinder
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this Disk cutter/angle grinder
-
-
Are you wearing the correct PPE for the use of the Disk cutter/angle grinder
-
Is the blade or wheel well maintained and in good condition
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Square Sander Makita 240v
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this sander
-
Has the sander been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the sander
-
Is the wheel sharp well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Square Sander Makita 240v
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this sander
-
Has the sander been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the sander
-
Is the wheel sharp well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Orbital sander Makita 240v
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this sander
-
Has the sander been PAT tested and have you undertaken a visual on any wiring before the time of use.
-
-
Are you wearing the correct PPE for the use of the sander
-
Is the wheel sharp well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Battery SDS drill Makita
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
-
-
-
Have you read and understood the above risk assessment associated with this SDS drill.
-
-
Are you wearing the correct PPE for the use of the SDS drill
-
Are your drill bits well maintained
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Circular saw 240v
-
-
By continuing with this sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this Circular saw
-
-
Are you wearing the correct PPE for the use of the Circular saw
-
Is the blade/wheel sharp and well maintained
-
Has the Circular saw been PAT tested and have you undertaken a visual on any wiring before the time of use
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Bosch SDS drill 240v
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this SDS drill
-
Has the Planer been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the SDS drill
-
Are your drill bits well maintained
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Screw gun Makita
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this Screw gun
-
Has the Screw gun been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Screw gun
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Titan Diamond drill bits
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you competent to use this Diamond drill bit set
-
-
-
-
Have you read and understood the above risk assessment associated with this Diamond drill bit set
-
-
Are you wearing the correct PPE for the use of the Diamond drill bit set
-
Are your drill bits well maintained and in good order
-
Is the area you are Drilling in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the Diamond drill bit set after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Heat gun
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
Have you filled out the St Clare's Hot work permit
-
-
-
-
Have you read and understood the above risk assessment associated with this Heat gun
-
Has the Heat gun been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Heat gun
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Rotozip 240v
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this Rotozip
-
Has the Rotozip been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Rotozip
-
Is the blade and bits well maintained and in good condition
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Router 240v
-
-
By continuing with this sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this Router
-
Has the Router been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Router
-
Is the Router bit sharp and well maintained
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Router 240v
-
-
By continuing with this sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this Router
-
Has the Router been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Router
-
Is the Router bit sharp and well maintained
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Router 110v
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this Router
-
Has the Router been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Router
-
Is the Router bit sharp and well maintained
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Disk cutter/angle grinder 240v (Stored in shed)
-
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
Have you read and understood the above risk assessment associated with this Disk cutter/angle grinder
-
Has the Disk cutter/angle grinder been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Disk cutter/angle grinder
-
Is the blade or wheel well maintained and in good condition
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Breaker (Stored in shed)
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this Breaker
-
Has the Breaker been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Breaker
-
Are the Chisels and well maintained
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Table Router
-
-
By continuing with this sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
Have you read and understood the above risk assessment associated with this Router
-
Has the Router been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Router
-
Is the Router bit sharp and well maintained
-
Are any guards for the tool installed and functioning correctly
-
Is the area you are working in clear of any obstruction and safe to work in before you start using the tool
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
DeWalt Crosscut Mitre/Chop saw (Stored in 13 Lathbury Garage)
-
-
By continuing with the sign out of this machine/tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the machine/tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this machine
-
-
-
Have you read and understood the above risk assessment associated with this Chop saw / Crosscut Mitre
-
Has the Chop saw / Crosscut Mitre been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Chop saw / Crosscut Mitre
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are the machine guards installed and functioning correctly
-
Is there a push stick available for you to use should you need it
-
Is the machine stable and unlikely to move during operation
-
is the area clear of any obstruction and safe to work in before you start the machine
-
It is your responsibility to clean the machine after you have finished your work, please take the time to do immediately after your use
-
Crosscut Mitre/Chop saw Makita. In workshop
-
-
By continuing with the sign out of this machine/tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the machine/tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this machine
-
-
-
Have you read and understood the above risk assessment associated with this Chop saw / Crosscut Mitre
-
Has the Chop saw / Crosscut Mitre been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Chop saw / Crosscut Mitre
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are the machine guards installed and functioning correctly
-
Is there a push stick available for you to use should you need it
-
Is the machine stable and unlikely to move during operation
-
is the area clear of any obstruction and safe to work in before you start the machine
-
It is your responsibility to clean the machine after you have finished your work, please take the time to do immediately after your use
-
Metabo Planer
-
-
By continuing with the sign out of this machine/tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the machine/tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this machine
-
-
-
Have you read and understood the above risk assessment associated with this Metabo Planer
-
Has the Metabo Planer been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Metabo Planer
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are the machine guards installed and functioning correctly
-
Is there a push stick available for you to use should you need it
-
Is the machine stable and unlikely to move during operation
-
is the area clear of any obstruction and safe to work in before you start the machine
-
It is your responsibility to clean the machine after you have finished your work, please take the time to do immediately after your use
-
Record Power Polisher
-
-
By continuing with the sign out of this machine/tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the machine/tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this machine
-
-
-
Have you read and understood the above risk assessment associated with this Record Power Polsher
-
Has the Record Power Polisher been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Record Power Polisher
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are the machine guards installed and functioning correctly
-
Is the machine stable and unlikely to move during operation
-
is the area clear of any obstruction and safe to work in before you start the machine
-
It is your responsibility to clean the machine after you have finished your work, please take the time to do immediately after your use
-
Record Power Grinder
-
-
By continuing with the sign out of this machine/tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the machine/tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this machine
-
-
-
Have you read and understood the above risk assessment associated with this Record Power Grinder
-
Has the Record Power Grinder been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Record Power Grinder
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are the machine guards installed and functioning correctly
-
Is the machine stable and unlikely to move during operation
-
is the area clear of any obstruction and safe to work in before you start the machine
-
It is your responsibility to clean the machine after you have finished your work, please take the time to do immediately after your use
-
Mortiser
-
-
By continuing with the sign out of this machine/tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the machine/tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this machine
-
-
-
Have you read and understood the above risk assessment associated with this Scheppach Mortiser
-
Has the Scheppach Mortiser been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Scheppach Mortiser
-
Is the blade/wheel sharp and well maintained
-
Are the machine guards installed and functioning correctly
-
Is there a push stick available for you to use should you need it
-
Is the machine stable and unlikely to move during operation
-
is the area clear of any obstruction and safe to work in before you start the machine
-
It is your responsibility to clean the machine after you have finished your work, please take the time to do immediately after your use
-
Band Saw
-
-
By continuing with the sign out of this machine/tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the machine/tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this machine
-
-
-
Have you read and understood the above risk assessment associated with this Band Saw
-
Has the Band Saw been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Band Saw
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are the machine guards installed and functioning correctly
-
Is there a push stick available for you to use should you need it
-
Is the machine stable and unlikely to move during operation
-
is the area clear of any obstruction and safe to work in before you start the machine
-
It is your responsibility to clean the machine after you have finished your work, please take the time to do immediately after your use
-
Table Saw
-
-
By continuing with the sign out of this machine/tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the machine/tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this machine
-
-
-
Have you read and understood the above risk assessment associated with this Table Saw
-
Has the Table Saw been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Table Saw
-
Is the blade/wheel sharp and well maintained
-
Is the filter and extraction clean, clear, attached and working correctly
-
Are the machine guards installed and functioning correctly
-
Is there a push stick available for you to use should you need it
-
Is the machine stable and unlikely to move during operation
-
is the area clear of any obstruction and safe to work in before you start the machine
-
It is your responsibility to clean the machine after you have finished your work, please take the time to do immediately after your use
-
Makita battery 18v Number 1
-
-
By continuing with the sign out of this Battery YOU the maintenance operative are ensuing that it is well maintained, has significant charge for you to carry out your work, it is in proper working condition and you will carry out use safety.
-
It is your responsibility to return the Battery to its store in the maintenance workshop at the end of a working day. Please keep the Battery clean and place on re charge if it needs to be when your done.
-
Makita battery 18v Number 2
-
-
By continuing with the sign out of this Battery YOU the maintenance operative are ensuing that it is well maintained, has significant charge for you to carry out your work, it is in proper working condition and you will carry out use safety.
-
It is your responsibility to return the Battery to its store in the maintenance workshop at the end of a working day. Please keep the Battery clean and place on re charge if it needs to be when your done.
-
Makita battery 18v Number 3
-
-
By continuing with the sign out of this Battery YOU the maintenance operative are ensuing that it is well maintained, has significant charge for you to carry out your work, it is in proper working condition and you will carry out use safety.
-
It is your responsibility to return the Battery to its store in the maintenance workshop at the end of a working day. Please keep the Battery clean and place on re charge if it needs to be when your done.
-
Makita battery 18v Number 4
-
-
By continuing with the sign out of this Battery YOU the maintenance operative are ensuing that it is well maintained, has significant charge for you to carry out your work, it is in proper working condition and you will carry out use safety.
-
It is your responsibility to return the Battery to its store in the maintenance workshop at the end of a working day. Please keep the Battery clean and place on re charge if it needs to be when your done.
-
Makita battery 18v Number 5
-
-
By continuing with the sign out of this Battery YOU the maintenance operative are ensuing that it is well maintained, has significant charge for you to carry out your work, it is in proper working condition and you will carry out use safety.
-
It is your responsibility to return the Battery to its store in the maintenance workshop at the end of a working day. Please keep the Battery clean and place on re charge if it needs to be when your done.
-
Makita battery 18v Number 6
-
-
By continuing with the sign out of this Battery YOU the maintenance operative are ensuing that it is well maintained, has significant charge for you to carry out your work, it is in proper working condition and you will carry out use safety.
-
It is your responsibility to return the Battery to its store in the maintenance workshop at the end of a working day. Please keep the Battery clean and place on re charge if it needs to be when your done.
-
Makita battery 18v Number 7
-
-
By continuing with the sign out of this Battery YOU the maintenance operative are ensuing that it is well maintained, has significant charge for you to carry out your work, it is in proper working condition and you will carry out use safety.
-
It is your responsibility to return the Battery to its store in the maintenance workshop at the end of a working day. Please keep the Battery clean and place on re charge if it needs to be when your done.
-
Makita battery 18v Number 8
-
-
By continuing with the sign out of this Battery YOU the maintenance operative are ensuing that it is well maintained, has significant charge for you to carry out your work, it is in proper working condition and you will carry out use safety.
-
It is your responsibility to return the Battery to its store in the maintenance workshop at the end of a working day. Please keep the Battery clean and place on re charge if it needs to be when your done.
-
Makita battery 18v Number 9
-
-
By continuing with the sign out of this Battery YOU the maintenance operative are ensuing that it is well maintained, has significant charge for you to carry out your work, it is in proper working condition and you will carry out use safety.
-
It is your responsibility to return the Battery to its store in the maintenance workshop at the end of a working day. Please keep the Battery clean and place on re charge if it needs to be when your done.
-
Gutter cleaner Vac
-
-
By continuing with the sign out of this tool YOU the maintenance operative are ensuing that it is well maintained and in proper working condition, have the necessary safeguards in place before operating the tool and you will carry out work safety.
-
If you have to answer any of the Checklist questions as NO do not proceed or continue to use the machine and report to the Foreman or your line manager immediately.
-
Are you trained and competent to use this tool
-
-
-
-
-
Have you read and understood the above risk assessment associated with this Gutter cleaner Vac
-
Has the Gutter cleaner Vac been PAT tested and have you undertaken a visual on any wiring before the time of use
-
-
Are you wearing the correct PPE for the use of the Gutter cleaner Vac
-
Is the area you are working in clear of any obstruction and safe to work
-
It is your responsibility to clean the tool after you have finished your work, please take the time to do so immediately after use and return the tool to its Pigeonhole at the end of a working day.
-
Initial and sign
