SLASHER MAINTENANCE

• Audit Title

• Document No.

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

General inspection

• Check all hardware is tight

  Yes

  No

  N/A

• Inspect for any damaged components

  Yes

  No

  N/A

• Run the slasher to check for vibrations

  Yes

  No

  N/A

PTO SHAFT

• Grease the PTO shaft at location points (F-1)

  Yes

  No

  N/A

Gearbox oil level (F2)

• Check gear box oil. Use SAE 85-140 gear oil (not necessary to change)<br>WARNING: Gearbox becomes hot during operation

  Yes

  No

  N/A

• Raise slasher, switch off engine, inspect underneath<br>(use support under the slasher do not rely upon the tractor hydraulics

  Yes

  No

  N/A

Blades

• Inspect blades and bolts

  Yes

  No

  N/A

• Inspect from rear with tractor ENGINE OFF & PARK BRAKE ON, slasher lowered to the ground so it rests on skids

  Yes

  No

  N/A

• If excessive wear or damage, replace blades

  Yes

  No

  N/A

• New blades to be replaced in pairs to maintain correct balance

  Yes

  No

  N/A

• If blades are changed ensure bolts are secure and test for vibration

  Yes

  No

  N/A

• Photos required for report

  Media

• Select date

  Date

• Add signature

  Sign