Information

  • ModusLink Kildare Weekly Sprinkler Pump Check

  • Conducted on

  • Check carried out by:

  • All sections to be completed. Where appropriate take photos / enter comments.

1.0 - Previous inspection

  • 1.1 - Has the last inspection been reviewed?

  • 1.2 - Have matters arising been dealt with?

2.0 - Reservoir checks

  • 2.1 - Visual Check of Reservoir Water Level

  • 2.2 - Water Level above 50%?

  • 2.3 - Reservoir in sound condition?

3.0 - Diesel Pump Checks

  • 3.1 - Has Security been informed of test, and announcement made?

  • 3.2 - Oil level/condition ok?

  • 3.3 - Water level in heat exchanger / header tank at correct level?

  • 3.4 - Battery terminals in good condition?

  • 3.5 - Check water level in all batteries

  • 3.6 - Engine started by dropping pressure?

  • 3.7 - Cut in pressure in BAR?

  • 3.8 - When diesel pump is running record the following:

  • 3.8.1 - Water Temp:

  • 3.8.2 - RPM:

  • 3.8.3 - Churning Pressure:

  • 3.9 - Engine ran normally without leaks?

  • 3.10 - Engine was run for minimum of 30 minutes?

  • 3.11 - Total Run time of engine, from clock?

  • 3.12 - Battery charger in working order?

  • 3.13 - Is fuel tank in sound working condition?

  • 3.14 - Is suction valve in locked open position?

  • 3.15 - Is delivery valve in locked open position?

  • 3.16 - Are test line valves locked closed?

  • 3.17 - Has diesel pump been returned to Auto Standby?

  • 3.18 - Fuel tank at least 75% full at end of test?

4.0 - Jockey Pump Checks

  • 4.1 - Motor automatically started by dropping pressure?

  • 4.2 - Please record following pressure readings in BAR:

  • 4.2.1 - Cut IN Pressure:

  • 4.2.2 - Cut OUT Pressure:

  • 4.3 - Jockey Pump left in AUTO mode?

5.0 - Valve Set Checks

  • 5.1 - Chamber One - No. 7: 6" Riser

  • 5.1.1 - Control Valve Exercised?

  • 5.1.2 - Valve Locked Open?<br>

  • 5.1.3 - Bell Tested?

  • 5.1.4 - Time (Sec):

  • 5.1.5 - Drain Test?

  • 5.1.6 - Gauge Reading Above:

  • 5.1.7 - Gauge Reading Below:

  • 5.2 - Chamber One - No. 8: 4" Riser

  • 5.2.1 - Control Valve Exercised?

  • 5.2.2 - Valve Locked Open?<br>

  • 5.2.3 - Bell Tested?

  • 5.2.4 - Time (Sec):

  • 5.2.5 - Drain Test?

  • 5.2.6 - Gauge Readings:

  • 5.3 - Chamber Two - No. 6: 6" Riser

  • 5.3.1 - Control Valve Exercised?

  • 5.3.2 - Valve Locked Open?<br>

  • 5.3.3 - Bell Tested?

  • 5.3.4 - Time (Sec):

  • 5.3.5 - Drain Test?

  • 5.3.6 - Gauge Readings:

  • 5.4 - Chamber Two - No. 5: 4" Riser

  • 5.4.1 - Control Valve Exercised?

  • 5.4.2 - Valve Locked Open?<br>

  • 5.4.3 - Bell Tested?

  • 5.4.4 - Time (Sec):

  • 5.4.5 - Drain Test?

  • 5.4.6 - Gauge Readings:

6.0 - Emergency Generator

  • 6.1 - Has Emergency Generator been run successfully?

Sign Off

  • Comments

  • Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.