Terra Centrifuge Inspection Report - v01

• Operator:

• Operations Area

  Mid-Continent

  North Louisiana

  South Texas

  West Texas

• Rig Name:

• Rig Activity:

• Well #:

• Commissioning Date:

• Auditor's Name:

Equipment Placement

• All Pollution Pans in Place as Required?

  Yes

  No

  N/A

• All Equipment Spotted As Per Survey

  Yes

  No

  N/A

Electrical Hazards Identified

• All Equipment Properly Grounded with Grounding Wire Secured?

  Yes

  No

  N/A

• Check BICC Connections for Exposed Wire and / or Water-tight Seal? (Peckerheads, top & bottom of all electrical panels)

  Yes

  No

  N/A

Cleaning

• Is centrifuge 1 exterior clean?

  Yes

  No

  N/A

• Is centrifuge 1 interior Clean?

  Yes

  No

  N/A

• Was Feed Tube on Centrifuge 1 Removed/Rotating Assembly cleaned?

  Yes

  No

  N/A

Exterior Inspection

• Is Coffin Lid on Centrifuge 1 in Good Operating Condition and free of Cracks? Please provide photos with 1 having asset #.

  Yes

  No

  N/A

• Are all Coffin Lid Bolts on Centrifuge 1 in Good Operating Condition? Please provide photos.

  Yes

  No

  N/A

• Is Centrifuge Belt guard bolted to skid with no danger of rubbing belt? If not, provide a photo.

  Yes

  No

  N/A

Centrifuge 1 Wear Items

• With Feed Tube Removed from Centrifuge 1 Measure the Length. Is the length less than 38.25 inches from end to end? Provide photo.

  Yes

  No

  N/A

• Open coffin lid on Centrifuge 1 to see rotating assembly. Are Centrifuge Plows / Wear Inserts in Good Operating Condition? (no damage to rotating assembly) Provide photos.

  Yes

  No

  N/A

• Do Centrifuge 1 Plows have all fasteners secured properly in Good Operating Condition?

  Yes

  No

  N/A

• Does Centrifuge 1's End Wear Plate in Good Operating Condition? (no damage to rotating assembly) Provide 2 photos from different angles

  Yes

  No

  N/A

• Is the Solids Wear Liner on Centrifuge 1 in Good Operating Condition (no damage to the rotating assembly)? Provide photo

  Yes

  No

  N/A

Centrifuge 1 Settings

• Centrifuge 1's Pond Depths Set At 7 - 7.5?

  Yes

  No

  N/A

• Centrifuge 1 belt on proper speed configuration?

  Yes

  No

  N/A

• Rotation Checked on Centrifuge 1?

  Yes

  No

  N/A

Cleaning

• Is Centrifuge 2 exterior clean?

  Yes

  No

  N/A

• Is Centrifuge 2 exterior clean?

  Yes

  No

  N/A

• Was Feed Tube on Centrifuge 2 Removed / Rotating Assembly cleaned?

  Yes

  No

  N/A

Exterior Inspection

• Is Coffin Lid on Centrifuge 2 in Good Operating Condition and free of Cracks? Please provide photos with 1 showing asset number.

  Yes

  No

  N/A

• Are all Coffin Lid Bolts on Centrifuge 2 in Good Operating Condition? Please provide photos.

  Yes

  No

  N/A

• Is Centrifuge Belt guard bolted to skid with no danger of rubbing belt? If not, provide a photo.

  Yes

  No

  N/A

Centrifuge 2 Wear Items

• With Feed Tube Removed from Centrifuge 2 Measure the Length. Is the length less than 38.25 inches from end to end? Provide photo

  Yes

  No

  N/A

• Open coffin lid on Centrifuge 2 to see rotating assembly. Are Centrifuge Plows / Wear Inserts in Good Operating Condition? (no damage to rotating assembly) Provide photos.

  Yes

  No

  N/A

• Do Centrifuge 2 Plows have all fasteners secured properly in Good Operating Condition?

  Yes

  No

  N/A

• Is Centrifuge 2's End Wear Plate in Good Operating Condition? (no damage to rotating assembly) Provide 2 photos from different angles

  Yes

  No

  N/A

• Is the Solids Wear Liner on Centrifuge 2 in Good Operating Condition (no damage to the rotating assembly)? Provide photo

  Yes

  No

  N/A

Centrifuge 2 Settings

• Centrifuge 2's Pond Depths Set At 7 - 7.5?

  Yes

  No

  N/A

• Centrifuge 2 belt on proper speed configuration?

  Yes

  No

  N/A

• Rotation Checked on Centrifuge 2?

Cleaning

• Is centrifuge exterior Clean?

  Yes

  No

  N/A

• Is centrifuge interior Clean?

  Yes

  No

  N/A

• Was Feed Tube Removed/Rotating Assembly cleaned?

  Yes

  No

  N/A

Exterior Inspection

• Is Coffin Lid in Good Operating Condition and free of Cracks? Please provide photos with 1 showing asset number or serial number if asset number not present.

  Yes

  No

  N/A

• Are all Coffin Lid Bolts in Good Operating Condition? Please provide photos.

  Yes

  No

  N/A

• Is Centrifuge Belt guard bolted to skid with no danger of rubbing belt? If not, provide a photo.

  Yes

  No

  N/A

Centrifuge Wear Items

• With Feed Tube Removed Measure the Length. Is the length less than 38.25 inches from end to end? Provide photo.

  Yes

  No

  N/A

• Open coffin lid to see rotating assembly. Are Centrifuge Plows / Wear Inserts in Good Operating Condition? (no damage to rotating assembly) Provide photos.

  Yes

  No

  N/A

• Do Centrifuge Plows have all fasteners secured properly in Good Operating Condition?

  Yes

  No

  N/A

• Is the Centrifuge End Wear Plate in Good Operating Condition? (no damage to rotating assembly) Provide 2 photos.

  Yes

  No

  N/A

• Is the Solids Wear Liner in Good Operating Condition (no damage to the rotating assembly)? Provide photos

  Yes

  No

  N/A

Centrifuge Settings

• Centrifuge(s) Pond Depths Set at 7 - 7.5?

  Yes

  No

  N/A

• Centrifuge belt on proper speed configuration?

  Yes

  No

  N/A

• Rotation Checked on Centrifuge?

  Yes

  No

  N/A