Information
-
Store name
-
Store Number
-
Conducted on
-
Prepared by
Server location/ Cabinet details
-
Location of existing ISSO servers<br>
-
Do we have 3u of rack space within MDF cabinet?<br>
-
Add media
-
Height and width of cabinet<br>
-
Do we have rack mounting profiles to the front and rear of the cabinet?<br>
-
Detail the measurement from the front of the cabinet to the wall/obstruction in front of the cabinet?<br>
-
Detail the measurement from the back of the cabinet to the wall/obstruction behind the cabinet?<br>
-
Do we need an electrical engineer?<br>
-
Scope of works for the remediation activities?
- Additional PDU X1
- Additional PDU X 2
- Additional Data points
-
Do the existing servers need to be relocated to a temporary location to install the new servers ?
-
If the Servers need to be temporarily relocated please give details below and attach a picture of the new location.
-
Add media
-
What power source is the cabinet currently fed from.
- Red Electrak COPC Board
- Socket under cabinet
- Socket on wall behind cabinet
- Other
-
Do we have a spare 3 pin socket to connect a 6way PDU and is it live?<br>
Switch Configuration
-
Switch 1 free ports
-
Switch 2 free ports
-
Add media
-
-
Are ports 37,38 and 39 available on MDF Switch 2 ? Please list the ports that are available in this range. If there's only 1 switch in the MDF then this question refers to that switch.
- Port 37 SW2
- Port 38 SW2
- Port 39 SW2
- Port 40 SW2
-
Add media
-
If ports 37-39 above are not available , please list the next available ports between 40-43
- Port 40 SW2
- Port 41 SW2
- Port 42 SW2
- Port 43 SW2
-
Add media
-
Have 10G stacking modules been installed in the back of Switch 1 ?
-
Add media
Redundant Equipment
-
List the kit that can be removed. Provide photos for each of the kit types listed.
- RS6000
- Cisco Switches
- NTU Boxes
- MFS PC's
- Phone Systems
- Customer WIfI Router
- Tower UPS on IIS Servers
-
Add media
-
Are any cables plugged in to redundant equipment? List cables to be removed. Provide photo’s <br>for cables to be removed
-
Add media
UPS Information
-
Is there an existing UPS within the cabinet
-
Make and model of existing UPS
-
Is the existing UPS working ?
-
Are there separate UPS’s for the current Tower Servers under office desk?
-
GHS Location. Please select the location of the GHS dept within the store from the list provided.
-
Does the existing GHS Server have a UPS ? Please list model type and current status.
Counters Information
-
Types of scales in the store
-
Quantities of scales in store
-
Counter type in the store - Serve over , grab n go, Fish, Hot Chicken, Bakery.
-
- Deli /Serve over
- Grab N Go
- Hot Deli
- Bakery
- Fish
-
Add media
-
Add media
Additional Information
Sign Off
-
Engineer Signature