Information

  • Document No.

  • Airbus Broughton

Hydrant Test & Inspection

Fire Hydrant Information

  • Select the area that the fire hydrant is located, then select the fire hyrant No. from list. (Refer to Hydrant drawings for locations)

  • Location on site;

  • East site; Enter Hydrant No.

  • North Factory Area; Enter Hydrant No.

  • West site; Enter Hydrant No.

  • Site 3 Area; Enter Hydrant No.

  • Site 8 Area; Enter hydrant No.

  • Add details

Test Procedure

  • Confirm that all steps of test and inspection procedure has been undertaken.

  • All personnel to wear PPE appropriate to the task and surrounding conditions.

  • Remove the hydrant lid/lids utilising the key and bar

  • A standpipe should be fitted to the outlet to ensure that the thread or connection is in good order.

  • With the standpipe connected to the outlet, the valve should be partially opened to release a small quantity of the water through the hydrant via a key and bar placed on the hydrant spindle.

  • The flow of water should be directed into the gutter using a short hose

  • After closing the hydrant fully, insert a hand controlled branch into the standpipe or hydrant outlet.

  • Ensuring the branch closed, open the hydrant to it's fullest extent.

  • Whilst under pressure, examine all hydrant joints for leaks.

  • The hydrant can then be turned off, release the pressure by opening the branch then remove the branch then unship the standpipe.

  • The frost valve where fitted should be checked to ensure it is in a satisfactory working order (NB; this test should not be carried out during frosty weather.)

  • Replace the hydrant lid, ensuring a sound fit and the lid does not stand proud of the lid frame.

  • Crews to ensure area immediately surrounding the hydrant is free from debris, long grass or foliage and hydrant post and plate is clearly marked.

Issues / Actions Raised.

  • Record any obvious signs of damage, defects, or issues etc. Include photos where relevant.

  • Any Observations / Comments?

  • Enter details

  • Add Photo

Test & Inspection undertaken by;

  • Enter date of inspection, Watch, and all RFFS personnel who have carried out test procedure.

  • Select date

  • Test undertaken by;

  • RFFS personnel;

  • RFFS Personnel;

  • RFFS personnel

  • RFFS Personnel

  • Add signature

  • RFFS Personnel; additional

  • RFFS Personnel;

  • RFFS personnel;

  • RFFS Personnel;

  • RFFS Personnel;

  • Ensure all details are correct. Report any defects to Facilities Helpdesk. Email the completed audit to B. Ackerly

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.