Title Page
-
Conducted on
-
Prepared by
-
Machine Serial Number
-
Location
Untitled Page
-
Are there any loose mechanical bolts?
-
Are there any loose connectors, plugs etc?
-
Have the grease lines been filled?
-
All cabling and wiring tidy?
-
Are all Emergency Stops working correctly? Use E-Stop drawing for reference.
-
Are all reset buttons working in series with the power supplies?
-
Have you checked all power supplies for shorts?
-
Do all eletrical components have labels as per drawings?
-
Have all the limits been positioned to ensure that we are not going to crash the machine?
-
Have you checked all limits are connected by checking the lights on the limits and also the correct PLC lights up.
-
Are there any loose limits?
-
Have you programmed the Servo Drives following the requirements on the SERVO DRAWING.
-
Have you made sure that the pendant works in accordance with the PLC commands and labelling?
-
Have you checked for air leaks within the system? Ensuring that the pressure holds.
-
Checked all rams are in sync - Datum bar, X-Table and C-Axis?
-
Arduino program deployed and saved into DDM appropriately? Check which program is required 250um or 500um
