Scan this QR code to use this paper checklist on your smartphone or tablet or
visit
https://safetyculture.com/
Title Page
Site conducted
Conducted on
Assessor Name
Ian Keyland
Jonny Chaplin
Joanne Talbot
Guidance
Racking inspections to be completed on a monthly basis by a SEMA trained operative. Guidance to be followed as per training; Each rack aisle and its locations (EG Bay A) the following shall be inspected. 1: Front upright 2: Rear upright 3: Horizontal bracing 4: Diagonal Bracing 5: Base plat 6: Levelling plates 7: Floor fixings 8: Front beam 9: Rear beam 10: Beam safety lock 11: Frame spacer, 12: Load notices. And where applicable the following shall be checked. Nut and bolt set, guard rail, shelf panels, sacrificial leg kit, Column guard, splice and decking. Each inspector shall positively select Pass (No defect), Green, Amber or Red (Identified by the degree of damage). Where a RED or AMBER defect is identified, the inspector shall notify the production manager and / or factory manager and advise on action required. The risk level and action required guidance shall be followed.
The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions.
The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice.
You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction.
You should independently determine whether the template is suitable for your circumstances.
