Title Page
-
Conducted on
-
Checked By
Daily Checks
-
Check Front Gate Interlock is Working / Free From Damage
-
Check Rear Gate Interlock Is Working / Free From Damage
-
Check Main Isolator Switch Is Working / Free From Damage
-
Check Emergency Stop (Coil intact Side) Is Working / Free From Damage
-
Check Foot Pedal (Emergency Stop) Is Working / Free From Damage
-
Is The Display Screen Free From Damage
-
Check Emergency Stop (By Screen) Is Working / Free From Damage
-
Check Emergency Stop (Run Out) Is Working / Free From Damage
-
Check Cutting Blade Is In Good Condition
-
Have The Mandrels Been Greased
-
Has Grease Bank Been Greased
-
Are Pinch Points Clearly Identified
-
Is The Table Free From Damage
-
Does The Table Operate Freely
-
Are All The Double Head Elements Operating Freely & Free From Damage
-
Is The Guard In Place If The Double Head Elements Are Not Used
-
Make Sure Guard Is In Place Before Proceeding, You Should Know Better !!!!!!!
-
Is The Working Area Clean To Prevent Slips / Trips
-
Is The Machine Safe To Operate
-
Please advise Supervisor IMMEDIATELY
