Information
-
Document No.
-
USAirways Express Safety Audit
-
Conducted on
-
Prepared by
-
Station:
-
Flight #
Flight observations
Arrival
-
A. Is ramp area clear and obstacle free prior to and during marshaling?
-
B. Are correct hand signals used?
-
C. Are guide persons used if necessary?
-
D. Are day wands or night wands used as appropriate?
-
E. Are long chocks used to span both nose gear tires (or two short chocks)
-
F. is a 360` Post arrival Walk-Around completed within 10 minutes of aircraft arrival?
-
G. Are proper Jetway positioning procedures followed?
-
H. Are the correct number of cone used?
-
I. Is the placement of the cones correct?
-
J. Are cones in place before equipment is positioned to aircraft (except belt loader)?
-
K. Did employees ensure there were no 3-way connections?<br><br>If yes, select all from the list below
-
Please select GSE used that could have been a 3-way connection
- GPU
- LAV Cart
- Air Start
- Heater
- Utility Stairs
-
L. Did employees avoid walking through the prop arc or in-between the prop arc and fuselage?
-
M. Was passenger movement monitored on the ramp?
-
N. Did employees avoid walking under the wing of the A/C ?
Loading
-
O. Was ground equipment (belt loader, portable air stair, etc...) positioned so not to come in contact at any time<br>with the A/C?
-
P. Did employees stop completely at the boundary of the DIAMOND of SAFETY before entering?
-
Q. Did employees adhere to the 5 foot rule?
-
R. Did employees secure ground equipment used on A/C or in area?
-
S. Were correct cargo loading and CLR procedures followed?
-
T. Was A/C netting utilized if required?
Departure
-
U. Were cones in place until after ground equipment (except belt loader) was removed?
-
V. Were cones in place until A/C was ready for dispatch?
-
W. Was tow bar shear pin correctly installed?
-
X. Was headset used during pushback?
-
Y. Were guide persons used during pushback?
-
Z. Were wands utilized during pushback?
-
Z1. Were correct hand signal procedures used during pushback?
-
Z2. After pushback, was tow bar disconnected from tug prior to disconnecting form A/C?
-
Comments