Title Page
-
Deck
-
Deck
-
Conducted on
-
Prepared by
-
Location
-
Personnel
Deck
Forecastle Deck
-
Ques 1) Bulwark & Railing in good condition without bends dents detachments
-
Details (if any)
-
Image for Bulwark & Railing
-
Action Required
-
Due Date
-
Ques 2) Deck Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Snap Back Zone Marking
-
Details (if any)
-
Images for Snap Back Zone Marking
-
Action Required
-
Due Date
-
Ques 4) Stencilling Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image for Stencilling
-
Action Required
-
Due Date
-
Ques 5) Condition of Vent / Flaps / Rope / Hatch (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Vent / Flaps / Rope / Hatch
-
Action Required
-
Due Date
-
Ques 6) Condition of Suez Light Davit (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Suez Light Davit
-
Action Required
-
Due Date
-
Ques 7) Receptacle for Suez Light (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Receptacle for Suez Light
-
Action Required
-
Due Date
-
Ques 8) Condition of Companion Ladders (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Companion Ladders
-
Action Required
-
Due Date
Forecastle Store
-
Ques 1) Condition of W/T Door (Good / Bad / Satisfactory)
-
Details (if any)
-
Image for W/T Door
-
Action Required
-
Due Date
-
Ques 2) Condition of Lightning in Forecastle Store (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Lightning in Forecastle Store
-
Action Required
-
Due Date
-
Ques 3) Condition of Insulation Mat (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Insulation Mat
-
Action Required
-
Due Date
-
Ques 4) Dewatering System Alarm (Operational/ Non-Operational)
-
Details (if any)
-
Image of Dewatering Alarm
-
Action Required
-
Due Date
-
Ques 5) Bilge pump out system markings & instructions
-
Details (if any)
-
Images for Bilge Pump
-
Action Required
-
Due Date
-
Ques 6) Check Oil before pump out marking
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) General Housekeeping
-
Details (if any)
-
Images
-
Action Required
-
Due Date
-
Ques 8) Deck Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Deck
-
Action Required
-
Due Date
-
Ques 9) Condition of Hydraulic Hatch Cover (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Hatch Cover
-
Action Required
-
Due Date
-
Ques 10) Condition of Additional Machinery Installed (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for additional Machinery
-
Action Required
-
Due Date
-
Ques 11) Condition of Bitter and Hammer (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Bitter & Hammer
-
Action Required
-
Due Date
-
Ques 12) Condition of Spare Wires & Marking (Good / Bad / Satisfactory)
-
Images of Wire & Marking
-
Action Required
-
Due Date
-
Ques 13) Condition of L/J and Imm Suits marking (Good / Bad / Satisfactory)
-
Details (if any)
-
Images for Life Jacket & Immersion Suits
-
Action Required
-
Due Date
-
Ques 14) Emergency Towing Plan
-
Image
-
Action Required
-
Due Date
-
Ques 15) Chemicals/Lub oils Stored - MSDS & PPE
-
Details (if any)
-
Image
-
Due Date
-
Ques 16) Condition of Anchor wash pipe to hawsepipe (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Windlass
-
Ques 1) General Condition & Lubrication (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Condition of Lever Locking pins (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Condition of Bow Stopper (Good / Bad / Satisfactory)
-
Details (if any)
-
Image of Bow Stopper
-
Due Date
-
Ques 4) Condition of Brake Lining (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Condition of foundation & bolts (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Condition of Gear Protection (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Inspection Window Cover
-
Details (if any)
-
Image for Inspection Window Cover
-
Action Required
-
Due Date
-
Ques 8) Hyd. Leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Condition of Motor (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Condition of Operating Lever Lock (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Condition of Spurling pipe & hawse pipe Cover (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Condition of Exposed Cable (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Fore Mast
-
Ques 1) General Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image for Fore Mast
-
Action Required
-
Due Date
-
Ques 2) Electric cable guide & securing stays condition
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Turnbuckle greased and covered
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Condition of Light fixtures and fog horn (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Condition of Navigation & anchor Light (Good / Bad / Satisfactory)
-
Details (if any)
-
Image of Navigational & Anchor Light
-
Action Required
-
Due Date
-
Ques 6) Condition of Anchor Ball (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Forward Talk back System
-
Ques 1) Operational Test
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Mooring ropes (Fwd)
-
Ques 1) General condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 2) Identified as per Certificate
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Correct Reeving
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Question 4) Condition of Tail Ropes (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Mooring Winch Fwd
-
Ques 1) General Condition & Lubrication (Good / Bad / Satisfactory)
-
Details (if any)
-
Image for Mooing Winch Fwd
-
Action Required
-
Due Date
-
Ques 2) Condition of Lever Locking pins (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Brake Lining Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Foundation & Bolts Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Gear Protection Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Hyd. Leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Motor Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 8) Operating Lever Lock Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Direct Marking
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Remote Control Lever Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Fairlead Rollers & Bollards/bitts Fwd
-
Ques 1) SWL Marking
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Rollers free to move (Lubrication)<br>
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Roller Covers securing bolts
-
Details (if any)
-
Image of securing Bolts
-
Action Required
-
Due Date
-
Ques 4) Stripe / X marking on top cover
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Geeral Appearance<br>
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Rope Stoppers Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image for Rope Stopper
-
Action Required
-
Due Date
Main deck (S)
-
Ques 1) General Appearance (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Bulwark & Railing Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Walkway(Safety passage) Marking
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Heavy weather line
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Various Stencilling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Scuppers - Clear of blockages
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Fire Line isolation valve & Drain valve
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Fire control plan at accom entrance
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Cross over platforms
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Weather tight doors
-
Details (if any)
-
Image
-
Due Date
-
Ques 11) Ballast valve control box
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Hyd. Leaks in ballast control box
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Natural Vents conditions
-
Details (if any)
-
Image
-
Due Date
-
Ques 14) Escape Trunk Condition/Arrangement
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Main deck (P)
-
Ques 1) General Appearance (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Select date
-
Ques 2) Bulwark & Railing Condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action required
-
Due Date
-
Ques 3) Walkway(Safety passage) Marking
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Heavy weather line
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Various Stencilling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Scuppers - Clear of blockages
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Fire Line isolation valve & Drain valve
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Fire control plan at accom entrance
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Cross over platforms
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Weather tight doors
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Ballast valve control box
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Hyd. Leaks in ballast control box
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Natural Vents conditions
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Pipe Line
-
Ques 1) General Condition of Pipeline (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Due Date
-
Ques 2) Condition of underside Pipeline (Good / Bad / Satisfactory)
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 3) Condition of Expansion Joints (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Condition of U Clamps (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Identification
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Condition of Drain Valves (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Condition of Isolation Valves (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Air/sounding pipe (s)
-
Ques 1) General condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Rust & Weld Seems
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Internal condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Internal Rubber Gasket condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Float condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Wire Mesh condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 7) Save all tray capacity stencil
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Save all plugs with chain
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Sounding caps
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Stencilling on air pipe/sounding pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Air sounding pipes(s)
-
Ques 1) General condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Rust & Weld Seems
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Internal condition (Good / Bad / Satisfactory)
-
Image
-
Action Required
-
Select date
-
Ques 4) Internal Rubber Gasket condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Float condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Wire Mesh condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Save all tray capacity stencil
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Save all plugs with chain
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Sounding caps
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Stencilling on air pipe/sounding pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Hatch coamings and covers of No.1
-
Ques 1) Top side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Under side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Natural Vents condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Cements Hold Secured
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Marking / Stenciling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Control lever Box - Hyd leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Control block - connections
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Hyd Hoses
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Condition of sprocket (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Condition of Chain (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Chain Tightness
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Bottle screw condition at chain ends
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Hyd. Jacks for hatch covers
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 14) Canvas covers for hyd rams
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 15) Drain valves (NRV)for drain channel
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 16) Caps for drain valves
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 17) Gas sampling point stencil & Cap
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 18) Compression bar condition
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 19) Rubber packing compression
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 20) Resting pads
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 21) Cleats - Condition of rubber gasket & metal washer & Nut
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 22) Rollers moving freely
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 23) Hinge; Bushes Condition
-
Details (if any)
-
Image
-
Due Date
-
Ques 24) Grease nipple and associated pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 25) Hatch cover stopper condition
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 26) Water Tightness tested: (Date)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Hatch coamings and covers of No.2
-
Ques 1) Top side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Under side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Natural Vents condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Cements Hold Secured
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Marking / Stenciling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Control lever Box - Hyd leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Control block - connections
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Hyd Hoses
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Condition of sprocket (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Condition of Chain (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Chain Tightness
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Bottle screw condition at chain ends
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Hyd. Jacks for hatch covers
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 14) Canvas covers for hyd rams
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 15) Drain valves (NRV)for drain channel
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 16) Caps for drain valves
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 17) Gas sampling point stencil & Cap
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 18) Compression bar condition
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 19) Rubber packing compression
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 20) Resting pads
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 21) Cleats - Condition of rubber gasket & metal washer & Nut
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 22) Rollers moving freely
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 23) Hinge; Bushes Condition
-
Details (if any)
-
Image
-
Due Date
-
Ques 24) Grease nipple and associated pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 25) Hatch cover stopper condition
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 26) Water Tightness tested: (Date)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Hatch coamings and covers of No.3
-
Ques 1) Top side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Under side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Natural Vents condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Cements Hold Secured
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Marking / Stenciling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Control lever Box - Hyd leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Control block - connections
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Hyd Hoses
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Condition of sprocket (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Condition of Chain (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Chain Tightness
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Bottle screw condition at chain ends
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Hyd. Jacks for hatch covers
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 14) Canvas covers for hyd rams
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 15) Drain valves (NRV)for drain channel
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 16) Caps for drain valves
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 17) Gas sampling point stencil & Cap
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 18) Compression bar condition
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 19) Rubber packing compression
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 20) Resting pads
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 21) Cleats - Condition of rubber gasket & metal washer & Nut
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 22) Rollers moving freely
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 23) Hinge; Bushes Condition
-
Details (if any)
-
Image
-
Due Date
-
Ques 24) Grease nipple and associated pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 25) Hatch cover stopper condition
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 26) Water Tightness tested: (Date)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Hatch coamings and covers of No.4
-
Ques 1) Top side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Under side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Natural Vents condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Cements Hold Secured
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Marking / Stenciling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Control lever Box - Hyd leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Control block - connections
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Hyd Hoses
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Condition of sprocket (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Condition of Chain (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Chain Tightness
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Bottle screw condition at chain ends
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Hyd. Jacks for hatch covers
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 14) Canvas covers for hyd rams
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 15) Drain valves (NRV)for drain channel
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 16) Caps for drain valves
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 17) Gas sampling point stencil & Cap
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 18) Compression bar condition
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 19) Rubber packing compression
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 20) Resting pads
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 21) Cleats - Condition of rubber gasket & metal washer & Nut
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 22) Rollers moving freely
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 23) Hinge; Bushes Condition
-
Details (if any)
-
Image
-
Due Date
-
Ques 24) Grease nipple and associated pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 25) Hatch cover stopper condition
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 26) Water Tightness tested: (Date)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Hatch coamings and covers of No.5
-
Ques 1) Top side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Under side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Natural Vents condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Cements Hold Secured
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Marking / Stenciling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Control lever Box - Hyd leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Control block - connections
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Hyd Hoses
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Condition of sprocket (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Condition of Chain (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Chain Tightness
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Bottle screw condition at chain ends
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Hyd. Jacks for hatch covers
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 14) Canvas covers for hyd rams
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 15) Drain valves (NRV)for drain channel
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 16) Caps for drain valves
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 17) Gas sampling point stencil & Cap
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 18) Compression bar condition
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 19) Rubber packing compression
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 20) Resting pads
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 21) Cleats - Condition of rubber gasket & metal washer & Nut
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 22) Rollers moving freely
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 23) Hinge; Bushes Condition
-
Details (if any)
-
Image
-
Due Date
-
Ques 24) Grease nipple and associated pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 25) Hatch cover stopper condition
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 26) Water Tightness tested: (Date)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Hatch coamings and covers of No.6
-
Ques 1) Top side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Under side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Natural Vents condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Cements Hold Secured
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Marking / Stenciling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Control lever Box - Hyd leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Control block - connections
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Hyd Hoses
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Condition of sprocket (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Condition of Chain (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Chain Tightness
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Bottle screw condition at chain ends
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Hyd. Jacks for hatch covers
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 14) Canvas covers for hyd rams
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 15) Drain valves (NRV)for drain channel
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 16) Caps for drain valves
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 17) Gas sampling point stencil & Cap
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 18) Compression bar condition
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 19) Rubber packing compression
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 20) Resting pads
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 21) Cleats - Condition of rubber gasket & metal washer & Nut
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 22) Rollers moving freely
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 23) Hinge; Bushes Condition
-
Details (if any)
-
Image
-
Due Date
-
Ques 24) Grease nipple and associated pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 25) Hatch cover stopper condition
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 26) Water Tightness tested: (Date)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Hatch coamings and covers of No.7
-
Ques 1) Top side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Under side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Natural Vents condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Cements Hold Secured
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Marking / Stenciling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Control lever Box - Hyd leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Control block - connections
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Hyd Hoses
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Condition of sprocket (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Condition of Chain (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Chain Tightness
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Bottle screw condition at chain ends
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Hyd. Jacks for hatch covers
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 14) Canvas covers for hyd rams
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 15) Drain valves (NRV)for drain channel
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 16) Caps for drain valves
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 17) Gas sampling point stencil & Cap
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 18) Compression bar condition
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 19) Rubber packing compression
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 20) Resting pads
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 21) Cleats - Condition of rubber gasket & metal washer & Nut
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 22) Rollers moving freely
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 23) Hinge; Bushes Condition
-
Details (if any)
-
Image
-
Due Date
-
Ques 24) Grease nipple and associated pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 25) Hatch cover stopper condition
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 26) Water Tightness tested: (Date)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Hatch coamings and covers of No.8
-
Ques 1) Top side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Under side condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Natural Vents condition (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Cements Hold Secured
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Marking / Stenciling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Control lever Box - Hyd leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Control block - connections
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Hyd Hoses
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Condition of sprocket (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Condition of Chain (Good / Bad / Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Chain Tightness
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Bottle screw condition at chain ends
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Hyd. Jacks for hatch covers
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 14) Canvas covers for hyd rams
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 15) Drain valves (NRV)for drain channel
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 16) Caps for drain valves
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 17) Gas sampling point stencil & Cap
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 18) Compression bar condition
-
Details (if any)
-
Add media
-
Action Required
-
Due Date
-
Ques 19) Rubber packing compression
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 20) Resting pads
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 21) Cleats - Condition of rubber gasket & metal washer & Nut
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 22) Rollers moving freely
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 23) Hinge; Bushes Condition
-
Details (if any)
-
Image
-
Due Date
-
Ques 24) Grease nipple and associated pipe
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 25) Hatch cover stopper condition
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 26) Water Tightness tested: (Date)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
After Deck
-
Ques 1) Railing. (Good, Bad, Satisfactory)
-
Details (if any)
-
Image for railing
-
Action Required
-
Due Date
-
Ques 2) Deck condition. (Good, Bad, Satisfactory)
-
Details (if any)
-
Image for Deck condition
-
Action Required
-
Due Date
-
Ques 3) Snap Back zone marking.
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Stencilling
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Vent flaps
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Rope hatch
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Stern light & Stern Post
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Garbage Station (inc drums covers)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Garbage posters
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Garbage Compactor
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 11) Oxygen Room
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 12) Garbage Compactor
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 13) Flash back arresters
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 14) Warning posters
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 15) Bottles securing arrangement
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Mooring Winch Aft
-
Ques 1) General Condition & Lubrication. (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Lever Locking pins. (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Brake lining condition (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Foundation & bolts condition (Good , Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Gear protection condition (Good ,Bad ,Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Hyd. Leaks
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Motor condition (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 8) Operating levers lock (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 9) Direction Marking
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 10) Remote control lever (Good,Bad,Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Fairlead Rollers & Bollards/bitts Aft
-
Ques 1) SWL Marking
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Rollers free to move (Lubrication)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Roller Covers securing bolts
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Stripe / X marking on top cover
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) Geeral Appearance
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Rope Stoppers Condition (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Mooring ropes (Aft)
-
Ques 1) General Condition (Good , Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) Identified as per certificate
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Correct Reeving
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Tail Ropes Condition (Good,Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Aft Stn Talk back Sys.
-
Ques 1) Operational Test (Good,Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
Fairlead Rollers & Bollards/bitts Aft
-
Ques 1) General Condition (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 2) SWL Marking
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 3) Wire condition (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 4) Sheave
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 5) General lubrication (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 6) Hook & Locking arrangement
-
Details (if any)
-
Image
-
Action Required
-
Due Date
-
Ques 7) Air motor condition (Good, Bad, Satisfactory)
-
Details (if any)
-
Image
-
Action Required
-
Due Date