Title Page
-
Conducted on
-
Prepared by
-
Which network area are you in?
-
What is the site name?
-
What is the SAP ID?
-
What is the stream number, i.e. FCV1?
-
What is the type of control valve, i.e. jet stream/drag valve? Please enter 'unknown' if this cannot be identified, or if access cannot be gained.
-
Please add a photo of the control valve identified.
-
What is the type of flow control valve position feedback indication? (I.e. direct mounted or inferred using a pressure transmitter).
-
Please add a photo of the valve feedback indicator.
-
What is the asset health of the Flow Control Valve from a visual condition only? (Refer to Pete Wainwright's e-mail for a more detailed description).
- HI1 - new or as new.
- HI2 - good and serviceable.
- HI3 - some deterioration.
- HI4 - intervention required.
- HI5 - urgent intervention required.
-
Type of pneumatic outlet pressure over-ride controllers? (I.e. Bristol 624 MKII).
-
What is the functionality of the pneumatic outlet pressure over-ride controllers?
- High
- Low
- High/high
- Monitor
- Other
-
If 'other' please state what.
-
Total number of pneumatic outlet pressure over-ride controllers fitted on the volumetric systems?
-
Please add a photo of each type of controller, close-up and with the door open.
-
Asset health of the Volumetric Control Cabinets? (Refer to Pete Wainwright's e-mail for more detailed description).
- HI1 - new or as new.
- HI2 - good and serviceable.
- HI3 - some deterioration.
- HI4 - intervention required.
- HI5 - urgent intervention required.
-
Please add a photo of all volumetric cabinets, with all the doors closed.
-
Please add a photo of the internal components within each cabinet.
-
Approximate age of control system (in years)?
- <5
- 5-10
- 10-15
- 15-20
- 20-25
- 25+
-
I/P converter type?
-
Please add a photo to support your previous response.
-
I/P converter range?
-
If answer is 'other', please state the range.
-
Is the AUTO/MANUAL station located before the pneumatic over-rides or after?
-
Please add a photo to support your previous answer.
-
What type of RTU is it? (Question only required to be answered when completing FCV1).
-
Please add a photo of the RTU to support your answer, (only to be answered when completing FCV1).
-
Is the RTU configured with electronic high/low over-rides? (Question only required to be answered when completing FCV1).
-
General comments, i.e. isolated streams/assets, etc. Please add photos where necessary also.