Title Page
-
Site conducted
-
Conducted on
-
Prepared by
-
Location
-
References - Work Health and Safety Act 2020, Work Health and Safety (General) Regulations 2022, Worksafe WA guides & Publications, Farmsafe Australia, Australian Centre for Agriculture Health and Safety, University of Sydney and other relevant documentation available across Australia.
Disclaimer - The information provided in this document is not a service as provided by Section 26A Work Health and Safety Act 2020 and can only assist you in the most general way. This document does not replace your statutory requirement or legislation obligations under any relevant state and territory legislation that you are responsible for. WAFarmers or Preplan Pty Ltd is not liable in any form resulting from any action taken or reliance made by you on the information or material contained in this document which is of a general nature. Before relying on the material, users should carefully make their own assessment as to its accuracy, currency, completeness and relevance for their purposes, and should obtain own independent legal advice relevant to their particular circumstances. Notwithstanding anything contained therein, WAFarmers or Preplan Pty Ltd will not except or be liable in any form for any loss or other consequences (whether or not due to the negligence of the consultants, their servants or agents) arising out of the services rendered by the consultants. This document is copyright© to WAFarmers and Preplan Pty Ltd in all forms and aspects.
-
Windmills frames are not damaged, are in good repair.
-
Ladders and platforms are not damaged and safe to use
-
Safety harnesses are used when climbing heights
-
Wind risk is assessed before working on windmills
-
Fall arrest systems are used when working above the ground to service mills and high tanks
-
Solar panels and wiring are protected from damage
-
All bore motors, drive shafts and belts are guarded
-
Motors are stopped and keys removed (or lockout switches fitted) before servicing and maintaining all pumps and motors
-
All bores, wells and inspection pits are properly covered and secured closed
-
Confined spaces have been identified and sign posted
-
Only skilled contractors capable of managing steep slopes are employed to clean or build dams
-
Location inspection undertaken
-
I confirm I have undertaken this inspection