Title Page
-
Document No.
-
Site Induction
-
Sensus Ref:
-
Conducted on
-
Prepared by
-
Location
SITE INDUCTION
-
Has vehicle parking locations been identified or explained?
-
It is a requirement when working in isolation for contractors to have a suitable first aid kit at their disposable. Does the Contractor have a first aid kit?
-
Has first aid kit locations and first aid trained personnel been identified?
-
Have toilet and water facilities been identified to the Contractor
-
Has power supply locations been identified to the Contractor and do they have RCD to use.
-
Has rubbish and general housekeeping locations been identified and general housekeeping explained to the Contractor?
-
Has the proper use of lead stands or lead hangers been identified and explained where applicable?
-
Has the process of loading/unloading of delivery trucks or vehicles been explained outlining overhead power lines where applicable?
SITE WHS COORDINATION PLAN
-
Has the nearest hospital or medical Centre locations been identified?
-
Has emergency assembly point/s ,locations been identified?
-
Have site specific hazards been identified to contractors. If yes they must review their SWMS.
-
Have site safety rules been explained to the Contractor?
-
Has site contact information been identified to the Contractor?
INCIDENT NOTIFICATION
-
Has the process of reporting any incidents, injury, accident or near misses been explained to the Contractor.
SIGN OFF
-
Have you been given the opportunity to ask questions about anything on this form and your question answered so you have a full understanding of everything mentioned within?
-
I have completed an induction into this Sensus Building Group job site.
-
I agree to induct all my contractors and employees into the site safety proceedures within the site plan prior to commencing works on site.
-
I agree to communicate, report any site specific hazards or incidents to the site supervisor and other personnel and residents at the site address.
-
I will review my SWMS whenever they go outside the scope of works to be completed that is not outlined in my SWMS.
Add signers
-
Contractor's name.
-
Photograph of safety card and SWMS if supplied.
-
Signature of person carrying out induction.