Title Page
-
This form must be completed before commencing production. This form also includes Daily Scale Calibration checks.
-
Site conducted
-
Conducted on
-
Prepared by
-
Confirm the operating rooms for today's production
- Syrup room
- Chocolate room
Pre-Operational Check
-
Are there enough hairnets and beard nets in the Changing Room?
-
Are all PPEs (overalls & gumboots) correctly stored? Everything should be in the right cubicle.
-
Are there enough hand soap, hand sanitiser and paper towels in the dispensers?
-
Is all the empty Vat clean and free from foreign matter?
-
Is all the working bench clean and free from foreign matter?
-
Are waste bins clean and accessible?
-
No product/packaging material directly on the floor?
-
Free from any insects (e.g., fruit flies, midges, mosquitos, flies)?
-
If there are any, spray the insecticides and rinse off with water. Make sure there are no ingredients & products. If you need to spray those areas, you need to take those out and bring them back once rinsed.
-
Free from broken or damaged glass or hard brittle plastics?
-
Are all the Hoses hanging up and off the floor?
-
Is the Touch Screen for REQN working?
-
Any other comments or observations?
Scale Calibration
-
Check the scale number and use the correct test weight for the calibration.
-
Procedure: 1) Turn scale on. 2) Put test weight on the scale. 3)Let measurement stabilise. 4) Measurement should be within the range.
-
If the weight is out of the acceptable range, please escalate to QA.
-
FLOOR SCALE: Scale Gladiator Series GGL - AEAG812. Confirm if the weight is between 9.99 and 10.01. (Use 10KG test weight, TOLERANCE +-10g)
-
BENCH SCALE: Scale Digi DS - 166SS. 18621565. Confirm if the weight is between 4.999 and 5.001. (Use 5KG test weight, TOLERANCE +-1g)
