Title Page
-
Inspector:
-
Supervisor:
-
Company:
-
Location:
-
Date:
INSPECTION
-
Compressed gas cylinders stored in an upright position in an approved trolley, cage, rack or cradle to prevent displacement or toppling when they are being stored or handled
-
Cylinders securely restrained to ensure they cannot fall from their vertical storage position with straps, clamps or chains
-
Compressed gas cylinders protected from potential impact from vehicles, mobile plant, falling objects, etc
-
The storage area is well ventilated through natural or mechanical ventilation
-
Gas cylinders are at a safe distance from exposure to an electrical arc, sparks, slags flame, or other heat sources
-
Good housekeeping maintained and storage area free of debris and combustible materials such as paper, cardboard, rags and grease, liquid fuels, oils and aerosols
-
Is there good access to the storage area for delivery vehicles? The surface on which the cylinders are stored is firm, level well drained and free of hollows and cavities
-
The storage area is designed to prevent unauthorised entry
-
Applicable Safety Data Sheets (SDS) available for the stored gases
-
Is appropriate warning signage displayed in accordance with HSNO regulations e.g.DANGER: NO SMOKING, NO IGNITION SOURCES, RESTRICTED AREA, AUTHORIZED PERSONNEL ONLY
-
Is oxygen stored separated by a fire wall away from fuel gases (min 3m) Over 200m3 (min 5m)
-
Electrical equipment in flammable gas stores shall comply with AS/NZS 3000
-
All gas cylinders must be clearly marked to show what they contain and the hazards associated with their contents
-
All cylinders have valve protection caps
-
Empty cylinders are separated from full cylinders with cylinders or area marked
-
Suitable fire fighting apparatus adjacent to the store. Dry powder fire extinguishers are preferred. Refer to the SDS for fire fighting requirements
-
Emergency response plan in place and communicated
-
Ensure valves are closed tightly when the cylinders are not in use
-
Gas hoses in good condition and stored off the ground to prevent dirt and grit entering at hose ends
-
A Flash Back Arrestor is fitted to the regulator and hand piece used for thermal cutting
-
Torches are only lit with approved friction-type lighters
-
Fire extinguisher of an appropriate type for the gas in use within 5m of all hot work
Inspection Team
-
Signature:
-
Signature:
-
Signature: