Information
-
For Towers up to 5m in Height & First time, alteration, event and at least every 7 days
General Details
-
Location
-
Date of Inspection
-
Name of inspector
General Description
-
Take photo of tower
-
Scaffold number
-
Scaffold Type
- Mobile
- Static
Inspection details
The Timing of Inspections
-
This checklist refers to one of the following timings (please tick as appropriate)
-
The Timing of Inspections
- When the tower has been built and taken into use for the first time
- After any substantial addition, dismantling or other alteration
- After any event likely to have effected its strength and/or stability
- At regular intervals NOT exceeding 7 days
Photo of Tower in Current State
-
Add photo's here
Checks
-
The following must be checked prior to anyone using the tower
-
Is a copy of the manufacturers instruction manual available to help people build or check the tower?
-
Has a risk assessment be written and safety briefing being carried out on the safe use of the tower for all users?
-
Is the environment and weather conditions safe so that it doesn't put people at risk?
-
If necessary, has the work area been cordoned off?
-
Are all the correct components in good working order?
-
Has the tower been built correctly with the right number of components?
-
Are the castors or base plates in contact with the ground and bearing their share of the weight of the tower and that all four breaks are applied?
-
Are the adjustable legs only being used to level the tower and not for gaining height?
-
Is the tower level in all planes?
-
Is the tower built on firm and stable ground?
-
Is the minimum width to height ratio correct for the tower correct?
-
For scaffolds over 2 m high, ensure that the height of the top working platform is no more than three times the minimum base dimension
For scaffolds under 2 m high, ensure that the height of the top working platform is no more than two times the minimum base dimension -
Are stabilisers required and are they the right size for the height of the tower and correctly fitted?
-
Check that the feet are fully in contact with the ground, and wing nuts are tight?
-
Check that the foot of the stabilisers are positioned to form a square?
-
Is the bracing pattern used, in accordance with the manufactures instructions?
-
Check that the hooks on the braces are fully engaged?
-
Check that all the handrails and mid guards are fitted in the correct positions?
-
Check that the frames are fully engaged?
-
Check that all platforms are in the correct position on the tower?
-
Check that the trap door opens to the outboard side of the tower?
-
Is the working platform at least 600mm wide?
-
Check that, if the tower is single width, that all platforms have trap doors?
-
If wind locks are fitted to the platform, check that they are engaged?
-
Are toe boards fitted to the working platform when gear is stowed?
-
If the tower has been tied in, check that the method is adequate and at the correct intervals in accordance with the manufactures instruction manual?
-
Is the safe working load marked on the tower and not exceeded?
-
Is the Mobile Tower Scaffold at least four meters away from any overhead power lines?
-
If the tower is to be left incomplete has a sign been attached that warns it’s unsafe?
Photo of Tower in Rectified State (if applicable)
-
Add photo's here
Name & signature of inspector
-
Name & signature of inspector