Title Page

  • Conducted on

  • Prepared by

BRIDGE

Resistor Banks

  • Clean-free of dirt and oil?

  • Are wiring connections tight?

  • Are wiring connections identified?

  • Are the grids free of defects?

  • Are weldments on frame free of cracks?

  • Are bracing bolts tight?

  • Are resistor banks secure?

  • Are grids free of signs of overheating?

Walkways

  • Clean-free of dirt and oil?

  • Are handrails on walkway secure?

  • Are weldments on frame free of cracks?

  • Are walkways free of obstructions?

  • Are welds on stairs and access free of cracks?

Bridge control boards

  • Clean-free of dirt and oil?

  • Are all arc chutes in place?

  • Are contactor tips tight?

  • Are contactor tips worn less than 50%?

  • Are relays mounted properly to contact board?

  • Are wiring connections tight?

  • Are wiring connections identified?

Trolley control boards

  • Clean-free of dirt and oil?

  • Are all arc chutes in place?

  • Are contactor tips tight?

  • Are contactor tips worn less than 50%?

  • Are relays mounted properly to contact board?

  • Are wiring connections tight?

  • Are wiring connections identified?

Main hoist control boards

  • Clean-free of dirt and oil?

  • Are all arc chutes in place?

  • Are contactor tips tight?

  • Are contactor tips worn less than 50%?

  • Are relays mounted properly to contact board?

  • Are wiring connections tight?

  • Are wiring connections identified?

Magnet control boards

  • Clean-free of dirt and oil?

  • Are all arc chutes in place?

  • Are contactor tips tight?

  • Are contactor tips worn less than 50%?

  • Are relays mounted properly to contact board?

  • Are wiring connections tight?

  • Are wiring connections identified?

Bridge motors

  • Are the motor brushes of the correct length?

  • Is the commutator free of solder splatter?

  • Are base bolts tight?

  • Are all motor gear case coupling bolts tight?

  • Are all motor wiring connections tight?

  • Are safety cables in place on guards and covers?

  • Are the gearcase base bolts tight?

  • Are the gearcase separation bolts tight?

  • Are grease lines installed?

  • Are the coupling guards in place?

  • Do the coupling guards have safety cables?

  • Do the gearcases have the proper oil level?

  • Is the dipstick marked min/max level?

  • Are the brakes properly adjusted?

  • Are the brake wheels free of grooves or cracks?

  • Is the thickness of the shoe lining in tolerance?

  • Are the cotter pins in place on the linkage pins?

Bridge wheels

  • Are the wheel flanges within tolerance?

  • Are the bearing bolts tight?

  • Are the coupling bolts tight?

  • Are the wheels free of cracks?

  • Are the rail sweeps in place?

  • Do the rail sweeps have safety cables?

  • Are the bridge bumper bolts tight?

  • Are the safety cables attached to the bumpers?

Main hot rail

  • Are the collector shoes worn within tolerance?

  • Are the shunts in good repair?

  • Are the wires tight?

  • Are the wooden staffs free of cracks or broken?

  • Are the mounting brackets straight?

Festoon system

  • Are the mounting bolts tight?

  • Are the wires free of cracked insulation?

  • Are the rollers and chains in place?

  • Will the festoon rollers roll on the track?

Lighting

  • Are all of the bridge lights working?

  • Are all of the safety lights working?

  • Are the crane status lights working?

  • Are the bulb guards on the light fixtures?

  • Are safety cables in place on the light fixtures?

Handline

  • Is there a handline on the bridge?

Fire extinguisher

  • Is the proper fire extinguisher in place on the bridge?

  • Does the extinguisher have an inspection tag?

  • Is the inspection tag up to date?

  • Is the fire extinguisher properly mounted?

Main breaker cabinet

  • Are the breakers marked?

  • Are the wires on the breaker tight?

  • Are the breakers secure to cabinet?

  • Do the doors close?

  • Are the safety cables in place?

  • Is there evidence of high current connections?

Air conditioner

  • Are the safety cables in place?

  • Is the cabinet tight?

  • Is the area free of evidence of a leak?

  • Are the controls clearly marked?

Bridge girder

  • Are the girder notches free of cracks?

  • Are the girder joints free of cracks?

  • Are the girders secure into the end ties?

TROLLEY

Handrails

  • Are handrails in place around the trolley?

  • Are handrails secure?

Guards

  • Are the trolley coupling guards in place?

  • Is the safety cable attached to the guards?

  • Are the bolts tight for the guards?

Trolley gearcase

  • Are the base bolts tight?

  • Is the oil level at the indicated safe level?

  • Are the bolts tight that hold gearcase together?

  • Is the gearcase free of oil leaks?

Trolley travel rails

  • Are the clips in place to hold rail down?

  • Is the rail wear within tolerance?

  • Are the rails in the correct position?

Trolley structure

  • Are the wheels free of cracks?

  • Are the weldments free of cracks?

  • Are the rail sweeps in place?

  • Do the rail sweeps have safety cables?

  • Are the trolley bumpers in place?

  • Do the trolley bumpers have safety cables?

  • Are the bolts tight for trolley bumpers?

Trolley motor

  • Are the covers on the motor?

  • Are the safety cables on the covers?

  • Is the length of motor brushes in spec?

  • Are the motor base bolts tight?

  • Are the wires tight on the motor?

MAIN HOIST

Guards

  • Is the main hoist coupling guards in place?

  • Is the safety cable attached to the guard?

  • Is the limit switch cover in place?

  • Does the limit switch cover have a safety cable?

  • Do the brake wheels have guards?

  • Do the brake wheel guards have safety cables?

Main hoist cables

  • Is the cable free of any broken wires per lay?

  • Is the cable free of bird nests?

  • Is the cable free of kinks?

Main hoist drum

  • Is the end of the drum free of cracks?

  • Are the cable clamps free of wear?

  • Are the pedestal bearing bolts tight?

  • Are cable clamp bolts tight?

Main hoist gearcase

  • Are the base bolts tight?

  • Is the dipstick marked min/max levels?

  • Is the oil level at the indicated safe level?

  • Are the gearcase separation bolts tight?

  • Is the gearcase free of leaks?

  • Are the drive coupling bolts tight?

Main hoist brakes

  • Are the brakes in proper adjustment?

  • Is the brake drum free of wear?

  • Is the break drum free of cracks?

  • Are the linkage pins free of wear?

  • Are the cotter pins in place on the linkage pins?

  • Is the thickness of the shoe lining in tolerance?

Main hoist limit switch

  • Are the limit switch tips worn within tolerance?

  • Do the tips swipe?

  • Check tips and tighten.

  • Does the limit trip arm work freely?

  • Is the limit trip cable installed properly?

Main hoist upper sheave

  • Is the sheave assembly secure?

  • Do the sheaves all have the correct radius?

  • Are the sheaves free of wear?

  • Is the guard in place over the sheaves?

  • Is the guard/sheave clearance correct?

  • Is the sheave pin free of wear?

  • Is the grease line hooked up?

  • Are the cable correctly installed in the sheaves?

Main hoist motor

  • Are the covers on the motor?

  • Are the safety cables on the covers?

  • Is the length of the motor brushes to spec?

  • Are the motor base bolts tight?

  • Are wires tight on the motor?

Main hoist block

  • Do the sheaves turn free?

  • Are the bolts tight in the block?

  • Is the sheaves free of defects?

  • Are all the sheaves the same size?

  • Are the sheaves worn to spec?

AUXILIARY HOIST

CAB

Housekeeping

  • Is the cab clean?

  • Is the cab free of loose objects?

Controllers

  • Are the controllers marked?

  • Are the push buttons marked?

  • Are the covers on the controllers secure?

  • Are the tips and rollers within spec on bridge controller?

  • Are the tips and rollers within spec on trolley controller?

  • Are the tips and rollers within spec on main hoist controller?

  • Are the tips and rollers within spec on magnet controller?

  • Are the tips and rollers within spec on lifter controller?

Windows

  • Are the windows clean?

  • Do the windows have broken glass?

  • Do all of the windows close properly?

Door and latch

  • Does the door open and close properly?

  • Are the door hinges secure?

  • Does the door have any damage?

  • Does the latch work properly?

Fire extinguisher

  • Is the proper fire extinguisher in place in the cab?

  • Does the extinguisher have the inspection tag?

  • Is the inspection tag up to date?

  • Is the extinguisher properly mounted?

Lighting

  • Do the cab lights work?

Operators chair

  • Does the chair have a safety cable?

  • Is the frame free of cracks or damage?

  • Is the chair proper size?

Air conditioner

  • Does the cab unit leak on cab equipment?

  • Is unit mounted securely?

  • Is the cab unit in good repair?

Siren

  • Does the siren work?

  • Does the siren have a safety cable?

  • Are the siren mounting bolts secure?

Communication equipment

  • Is the equipment mounted securely?

  • Does the equipment work properly?

  • Are the safety cables attached where needed?

Status lights

  • Can status lights be seen from the cab?

  • Do the status lights work?

  • Are the status lights secure?

  • Do the status lights have safety cables?

LOWER HOOK

  • Is hook worn within spec?

  • Are safety latches installed on hook?

  • Are safety latches free of damage?

CAPACITY

  • Is capacity marked on bridge?

  • Is capacity marked on trolley?

  • Is capacity marked on hooks?

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.