Title Page
-
Conducted on
-
Prepared by
BRIDGE
Bridge control boards
-
Clean-free of dirt and oil?
-
Are all arc chutes in place?
-
Are contactor tips tight?
-
Are contactor tips worn less than 50%?
-
Are relays mounted properly to contact board?
-
Are wiring connections tight?
-
Are wiring connections identified?
-
Trolley control boards
-
Clean-free of dirt and oil?
-
Are all arc chutes in place?
-
Are contactor tips tight?
-
Are contactor tips worn less than 50%?
-
Are relays mounted properly to contact board?
-
Are wiring connections tight?
-
Are wiring connections identified?
-
Main hoist control boards
-
Clean-free of dirt and oil?
-
Are all arc chutes in place?
-
Are contactor tips tight?
-
Are contactor tips worn less than 50%?
-
Are relays mounted properly to contact board?
-
Are wiring connections tight?
-
Are wiring connections identified?
-
Bridge motors
-
Are the motor brushes of the correct length?
-
Is the commutator free of solder splatter?
-
Are base bolts tight?
-
Are all motor gear case coupling bolts tight?
-
Are all motor wiring connections tight?
-
Are safety cables in place on guards and covers?
-
Are the gearcase base bolts tight?
-
Are the gearcase separation bolts tight?
-
Are grease lines installed?
-
Do the gearcases have the proper oil level?
-
Are the brakes properly adjusted?
Bridge wheels
-
Are the wheel flanges within tolerance?
-
Are the bearing bolts tight?
-
Are the wheels free of cracks?
-
Are the rail sweeps in place?
-
Do the rail sweeps have safety cables?
-
Are the bridge bumper bolts tight?
-
Are the safety cables attached to the bumpers?
Main hot rail
-
Are the collector shoes worn within tolerance?
-
Are the shunts in good repair?
-
Are the wires tight?
-
Are the wooden staffs free of cracks or broken?
-
Are the mounting brackets straight?
Festoon system
-
Are the mounting bolts tight?
-
Are the wires free of cracked insulation?
-
Are the rollers and chains in place?
-
Will the festoon rollers roll on the track?
Main breaker cabinet
-
Are the breakers marked?
-
Are the wires on the breaker tight?
-
Are the breakers secure to cabinet?
-
Do the doors close?
-
Are the safety cables in place?
-
Is there evidence of high current connections?
Bridge girder
-
Are the girder notches free of cracks?
-
Are the girder joints free of cracks?
-
Are the girders secure into the end ties?
TROLLEY
Trolley gearcase
-
Are the base bolts tight?
-
Is the oil level at the indicated safe level?
-
Are the bolts tight that hold gearcase together?
-
Is the gearcase free of oil leaks?
Trolley travel rails
-
Is the rail wear within tolerance?
-
Are the rails in the correct position?
Trolley structure
-
Are the wheels free of cracks?
-
Are the weldments free of cracks?
-
Are the rail sweeps in place?
-
Do the rail sweeps have safety cables?
-
Are the trolley bumpers in place?
-
Do the trolley bumpers have safety cables?
-
Are the bolts tight for trolley bumpers?
Trolley motor
-
Are the covers on the motor?
-
Are the safety cables on the covers?
-
Is the length of motor brushes in spec?
-
Are the motor base bolts tight?
-
Are the wires tight on the motor?
MAIN HOIST
Guards
-
Is the limit switch cover in place?
-
Does the limit switch cover have a safety cable?
-
Do the brake wheels have guards?
-
Do the brake wheel guards have safety cables?
Main hoist cables
-
Is the cable free of any broken wires per lay?
-
Is the cable free of bird nests?
-
Is the cable free of kinks?
Main hoist drum
-
Is the end of the drum free of cracks?
-
Are the cable clamps free of wear?
-
Are the pedestal bearing bolts tight?
-
Are cable clamp bolts tight?
Main hoist gearcase
-
Are the base bolts tight?
-
Is the oil level at the indicated safe level?
-
Are the gearcase separation bolts tight?
-
Is the gearcase free of leaks?
Main hoist brakes
-
Are the brakes in proper adjustment?
-
Is the brake drum free of wear?
-
Is the break drum free of cracks?
-
Is the thickness of the shoe lining in tolerance?
Main hoist limit switch
-
Are the limit switch tips worn within tolerance?
-
Do the tips swipe?
-
Check tips and tighten.
-
Does the limit trip arm work freely?
-
Is the limit trip cable installed properly?
Main hoist upper sheave
-
Is the sheave assembly secure?
-
Do the sheaves all have the correct radius?
-
Are the sheaves free of wear?
-
Is the guard in place over the sheaves?
-
Is the guard/sheave clearance correct?
-
Is the sheave pin free of wear?
-
Is the grease line hooked up?
-
Are the cable correctly installed in the sheaves?
Main hoist motor
-
Are the covers on the motor?
-
Are the safety cables on the covers?
-
Is the length of the motor brushes to spec?
-
Are the motor base bolts tight?
-
Are wires tight on the motor?
Main hoist block
-
Do the sheaves turn free?
-
Are the bolts tight in the block?
-
Is the sheaves free of defects?
-
Are all the sheaves the same size?
-
Are the sheaves worn to spec?
Siren
-
Does the siren work?
-
Does the siren have a safety cable?
-
Are the siren mounting bolts secure?
Status lights
-
Can status lights be seen from the ground?
-
Do the status lights work?
-
Are the status lights secure?
-
Do the status lights have safety cables?
PENDANT
-
Is pendant cable free of damage?
-
Is pendant controller free of damage?
-
Is pendant controller clearly labeled?
-
Is e-stop functioning properly?
-
Does pendant cable have strain relief?
-
Are all buttons functioning properly?
LOWER HOOK
-
Is hook worn within spec?
-
Are safety patches installed on hook?
-
Are safety latches free of damage?
CAPACITY RATINGS
-
Is capacity marked on bridge?
-
Is capacity marked on trolley?
-
Is capacity marked on hooks?