ACCESS 24V QA Check List -

Does the gate type match the order?

Will there be a spare parts inspection going along with is order?

Will there be a boom inspection going along with this order?

Was the gate paperwork signed off?

Are all of the serial numbers written down?

Is the gate left handed?

Check cable to spring clearance.

Make sure that the black convenience receptacle is not installed.

Make sure that the L N G connector is not installed.

Is the power supply the correct version? (3084.5061)

Are the spring jam nuts tightened?

Was the gate tested?

Does the gate have a "tested by" sticker signed?

Were any extra devices installed?

Was the BAT011-S ordered?

Is the battery bracket assembled with Velcro tie down?

Are 2 25 foot cables included?

Is the solar panel bracket included?

Is the solar panel included?

Are the 12AH batteries included?

Are all of the yellow marks correct?

Does the gate have the correct number of springs?

Does the motor type match the gate type?

Access = 144A-E101

Access-L = 144A-E103

Is the hood gasket installed?

Does the gate serial number sticker match the gate type?

Does the controller have all of the plugs?

Does the color match the order?

Does the hood match the housing?

Is the door dark grey?

Is the door a special color?

Is the gate set up for articulated?

Does it have the housing bracket?

Are all of the bolts installed for the housing bracket?

Does it have the correct springs?

Does the gate have any accessories?

Is the flange correct?

Are the small parts included with the flange?

Standard Flange

Are the u-rails included?

Is anything else ordered with the gate that needs to be palletized?

Is anything else ordered with the gate that should be installed?

Does the gate have special wiring?

Are 2 keys included?

Is the manual included?

Are 2 warning stickers included?

Do both doors slide into the channels without binding?

Does the hood fit properly and able to be locked without binding?

If this is an International order make sure there is no "made in Germany" labels on the product or on the packaging. Answer yes if there are NO made in Germany labels.

Is the overall fit and finish up to Magnetic Quality?