DRB QA Check List

Does the gate type match the order?

Will there be a spare parts inspection going along with is order?

Was the gate paperwork signed off?

Are all of the serial numbers written down?

Is the gate left handed?

Check cable to spring clearance.

Are the spring jam nuts tightened?

Was the gate tested?

Does the gate have a "tested by" sticker signed?

Is their a custom firmware and border crossing sticker by the tested sticker?

Is the DRB loop sticker on the MGC?

Is the diode jumper correctly installed? (+24V and C1-3)

Has the standard lower jumper been moved to 24V instead of 0V?

Has the key switch been installed and wired correctly? (Green to IN4, white to IN6, and brown to 0V)

Is the EM01 installed?

Is the DM02 installed?

Were any extra devices installed?

Are all of the yellow marks correct?

Does the gate have the correct number of springs?

Does the motor type match the gate type?

Parking Pro = 144A-E100

Is the hood gasket installed?

Does the gate have the correct UL sticker?

Does the gate serial number sticker match the gate type?

Does the controller have all of the plugs?

Does the color match the order?

Does the hood match the housing?

Is the door dark grey?

Is the door a special color?

Is the gate set up for articulated?

Does it have the housing bracket?

Are all of the bolts installed for the housing bracket?

Does it have the correct springs?

Does the gate have any accessories?

Is the flange correct?

Standard Flange

Breakaway Flange

Is the Vario grey section included? (Short housing only)

Are the u-rails included?

Is anything else ordered with the gate that should be installed?

Is anything else ordered with the gate that needs to be palletized?

Are 2 keys included?

Is the manual included?

Are 2 warning stickers included?

Do both doors slide into the channels without binding?

Does the hood fit properly and able to be locked without binding?

Is the overall fit and finish up to Magnetic Quality?