AGL 2024 - ToolBox Talks - Portable, Hand-Held Electrical Tools

Portable, Hand-Held Electrical Tools
Overview This talk will cover: before-use checks, use of electric tools and hazards.
Before-use checks
1 Make sure the casing isn’t damaged – if it is, don’t use it.
2 Make sure that all cables, plugs or connectors are sound and not damaged.
3 Use tools on connect power supply as instructed on the maker’s label. Only 110 volt tools are permitted on site.
4 Ensure the tool is properly earthed, unless it is an approved type that does not require earthing.
5 Ensure the cable is long enough to reach your work without straining it.
Using portable electrical tools
1 Portable electric tools should only be used for their designated purposes.
2 Ensure switches are working correctly before connecting to the power supply.
3 Wear eye protection if there is any risk to your eyes.
4 Disconnect tools when not in use.
5 Electric power tools should be regularly inspected and maintained by a competent electrician.
Hazards
1 Keep power cables off the floor. They may get damaged or cause someone to trip.
2 Electrical tools often present a noise hazard – wear ear protection if necessary.
3 Avoid standing on damp or wet surface when using electrical equipment.
4 Keep equipment clean and dry.
5 Never connect a portable electric tool to a lighting socket.
6 Don’t use blunt, worn or damaged bits and accessories.
7 Portable electrical tools, which have become wet should be allowed to dry then checked by a competent person for electrical safety before being reused.

Now go to section "Toolbox talk attendee register"

Toolbox talk attendees -

Please report to your supervisor to discuss your concerns.