Information

  • Anvil Beam and Support Clips Form

  • Document No.

  • Title

  • Conducted on

  • Prepared by

  • Box / Field

Clips

  • Is this an existing clip

  • Existing clips prepped?

  • QC sign-off AZCO (ready for anvil beams after sign off)

  • Add media

  • Is the elevation on the new clips correct? (HRC)

  • Add media

  • Has AZCO QC checked fit-up of clips?

  • AZCO QC Rep

  • Exceptions if applicable

  • Have welds been completed and Signed-off by (AZCO) QC? (all clips must be signed off this point)

  • Add signature

  • Post sign-off, the clips are now ready for Anvil Beams.

  • Add media

  • Add media

Anvil beams

Anvil Beams

  • Is this a inlet / outlet field?

  • Are the perforated plate hangers installed

  • Add media

  • Have the anvil beams been installed?

  • Is the elevation correct

  • Add media

  • is the spacing correct from centerline (CL) of field?

  • Add media

  • Anvil beams ready for collector plates

  • Add media

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.