Title Page
-
Baileys Skip Hire Ltd, Heritage Way, Corby, Northants, NN17 5XW
-
Conducted on
-
Prepared by
-
Location
Water Storage Tanks/Foam/Wetting Agents
-
Check Suction Line Valves are fully open
-
Check water level indicator(s)
-
Check pipe insulation and trace heating system operational
-
Check ladder and access platform in good condition if fitted
-
Check for any damage to tank or roof if applciable
-
Check visually for leaks
-
Ensure test return line is drained if manual
-
Check foam/Wetting agent level in tank report if low
-
Check foam/Wetting agent isolation valves are open
-
Check foam pump visually if fitted
-
Check foam proportioning is set correctly if applicable
Pumphouse/Pump Skid Sets
-
Record water pressure gauge readings
-
Ensure all suction and discharge isolation valves are fully open
-
Check diesel engine oil level
-
Check diesel engine fuel level
-
Main pumps automatic start up test via test return
-
Record main pump pressures
-
Check oil pressure
-
Test diesel set- Stop & restart using manual start button
-
Check for oil leaks
-
Check for fuel leaks
-
Check for exhaust leaks
-
Check heating is on, pumphouse should be 10 degrees
General inspection of fire system
-
Fire alarm panel showing no faults
-
Sounder beacons all free from damage
-
UPS Systems show full charge and are operational
-
Water monitors are free from damage and in the parked position
-
Check there are no signs of damage to any feed pipework
-
Visual inspection of detection system, View monitor screen
-
Visual inspection that detection is not damaged
Bi Annual by Fire Shield Systems Ltd
-
Full system operational checks and testing
-
Check flow rate and pressure of main pumps
-
Open and close all isolation valves
-
Check correct operation of flow switches sprinkler circuit
-
Verification of pump alarm panel if fitted
-
Diesel engine failure test (Annual)
Any other comments - Report faults as per site rules - Faults can be reported to service@fireshieldsystemsltd.co.uk
-
Comment Box:
Signed
-
Name:
-
Signature:
Untitled Page