Barnard Production Weld - duplicate

• Job Number

• Conducted on

  Date

• Prepared by

• Location
  Address

• Weld Number(s) or Station Number

• Welder(s) Stencil or crew covered by audit

• Add media

  Media

• JHA and Hot Work Completed?

  Yes

  No

  N/A

Welding

• Does the welder(s) have their current weld certification ?

  Yes

  No

  N/A

• Which WPS is the crew welding from?

• Does WPS match pipe grade, wall thickness and design?

  Yes

  No

  N/A

• Welding Materials

  Select 200 Degree Temp Stick Insulated Stinger 3/32 6010 5p 1/8 6010 5p 5/32 6010 5p 1/8 7010 HYP 5/32 7010 HYP 3/16 7010 HYP 4mm 8010 5mm 8010 3/32 7018 1/8 7018 5/32 7018 3/32 8018 1/8 8018 5/32 8018

  • 200 Degree Temp Stick
  • Insulated Stinger
  • 3/32 6010 5p
  • 1/8 6010 5p
  • 5/32 6010 5p
  • 1/8 7010 HYP
  • 5/32 7010 HYP
  • 3/16 7010 HYP
  • 4mm 8010
  • 5mm 8010
  • 3/32 7018
  • 1/8 7018
  • 5/32 7018
  • 3/32 8018
  • 1/8 8018
  • 5/32 8018

• Inspector Present?

  Yes

  No

  N/A

• Pipe bevel cleaned 1 inch back inside and outside?

  Yes

  No

  N/A

• Was the pipe trastioned to standard and design?

  Yes

  No

  N/A

• What was the minimum pre-heat maintained during welding process?

• Visually inspected weld to PG&E Standard

  Yes

  No

  N/A

• Weld has less than 1/32'' external undercut
  undercut less than 1/32'' greater than 1/64'' for less than 2'' continuous in 12''
  NO high spots above 5/32''
  NO high spots over 1/8'' for 1'' continuous
  NO cold lap
  NO Pin Holes
  Above flush with pipe

• Welders Stencil Wrote on Pipe

  Yes

  No

  N/A

• Does the piece match the drawing

  Yes

  No

  N/A