Title Page
-
Conducted on
-
Prepared by
-
Location
Battery Container 02-BAT-11
Container Exterior
-
Check perimeter of container for security, corrosion, rust and moisture build up. Rub down and patch paint as required
-
Check earthing connections present and in good condition
-
(Using safe methods of access) Check roof of container for foreign debris, nesting, pools of water and other breaches
-
Check beneath the container for foreign debris, nesting, corrosion and other breaches
-
Check fire indicator above door
HVAC
-
Check fans for excessive vibration/noise
-
Check for condensation water and clean condensation drain if nescessary
-
Check pipe insulation in place and replace if necessary
-
Wipe down units
Container Interior
-
Check for correct operation of doors and door contacts if present
-
Check for correct operation of lighting circuits
-
Check fire alarm panel for correct operation and presence of faults
-
Check NOVEC gauge for correct pressure
-
Check for internal condensation
-
Check HVAC for correct temperature settings and operation
-
Check for excessive vibration on HVAC units
- Satisfactory
- Unsatisfactory
- NA
-
Check cabinet doors are secure and do not present an obstruction
-
Check ACBs for correct engagement, overall condition and correct spring status
-
Check for any tripped MCBs and reset. Investigate if unable to.
Batteries
-
Check for any wire distortions or change of colour
-
Check for rust, verdigris or corundum
-
Check for any chemical or corrosive smells
-
Check for battery fan operation
-
Check overall condition of batteries
General
-
Clean container
-
Record inspection in log book and sign
-
Sign
Battery Container 02-BAT-12
Container Exterior
-
Check perimeter of container for security, corrosion, rust and moisture build up. Rub down and patch paint as required
-
Check earthing connections present and in good condition
-
(Using safe methods of access) Check roof of container for foreign debris, nesting, pools of water and other breaches
-
Check beneath the container for foreign debris, nesting, corrosion and other breaches
-
Check fire indicator above door
HVAC
-
Check fans for excessive vibration/noise
-
Check for condensation water and clean condensation drain if nescessary
-
Check pipe insulation in place and replace if necessary
-
Wipe down units
Container Interior
-
Check for correct operation of doors and door contacts if present
-
Check for correct operation of lighting circuits
-
Check fire alarm panel for correct operation and presence of faults
-
Check NOVEC gauge for correct pressure
-
Check for internal condensation
-
Check HVAC for correct temperature settings and operation
-
Check for excessive vibration on HVAC units
- Satisfactory
- Unsatisfactory
- NA
-
Check cabinet doors are secure and do not present an obstruction
-
Check ACBs for correct engagement, overall condition and correct spring status
-
Check for any tripped MCBs and reset. Investigate if unable to.
Batteries
-
Check for any wire distortions or change of colour
-
Check for rust, verdigris or corundum
-
Check for any chemical or corrosive smells
-
Check for battery fan operation
-
Check overall condition of batteries
General
-
Clean container
-
Record inspection in log book and sign
-
Sign
Battery Container 02-BAT-21
Container Exterior
-
Check perimeter of container for security, corrosion, rust and moisture build up. Rub down and patch paint as required
-
Check earthing connections present and in good condition
-
(Using safe methods of access) Check roof of container for foreign debris, nesting, pools of water and other breaches
-
Check beneath the container for foreign debris, nesting, corrosion and other breaches
-
Check fire indicator above door
HVAC
-
Check fans for excessive vibration/noise
-
Check for condensation water and clean condensation drain if nescessary
-
Check pipe insulation in place and replace if necessary
-
Wipe down units
Container Interior
-
Check for correct operation of doors and door contacts if present
-
Check for correct operation of lighting circuits
-
Check fire alarm panel for correct operation and presence of faults
-
Check NOVEC gauge for correct pressure
-
Check for internal condensation
-
Check HVAC for correct temperature settings and operation
-
Check for excessive vibration on HVAC units
- Satisfactory
- Unsatisfactory
- NA
-
Check cabinet doors are secure and do not present an obstruction
-
Check ACBs for correct engagement, overall condition and correct spring status
-
Check for any tripped MCBs and reset. Investigate if unable to.
Batteries
-
Check for any wire distortions or change of colour
-
Check for rust, verdigris or corundum
-
Check for any chemical or corrosive smells
-
Check for battery fan operation
-
Check overall condition of batteries
General
-
Clean container
-
Record inspection in log book and sign
-
Sign
Battery Container 02-BAT-22
Container Exterior
-
Check perimeter of container for security, corrosion, rust and moisture build up. Rub down and patch paint as required
-
Check earthing connections present and in good condition
-
(Using safe methods of access) Check roof of container for foreign debris, nesting, pools of water and other breaches
-
Check beneath the container for foreign debris, nesting, corrosion and other breaches
-
Check fire indicator above door
HVAC
-
Check fans for excessive vibration/noise
-
Check for condensation water and clean condensation drain if nescessary
-
Check pipe insulation in place and replace if necessary
-
Wipe down units
Container Interior
-
Check for correct operation of doors and door contacts if present
-
Check for correct operation of lighting circuits
-
Check fire alarm panel for correct operation and presence of faults
-
Check NOVEC gauge for correct pressure
-
Check for internal condensation
-
Check HVAC for correct temperature settings and operation
-
Check for excessive vibration on HVAC units
- Satisfactory
- Unsatisfactory
- NA
-
Check cabinet doors are secure and do not present an obstruction
-
Check ACBs for correct engagement, overall condition and correct spring status
-
Check for any tripped MCBs and reset. Investigate if unable to.
Batteries
-
Check for any wire distortions or change of colour
-
Check for rust, verdigris or corundum
-
Check for any chemical or corrosive smells
-
Check for battery fan operation
-
Check overall condition of batteries
General
-
Clean container
-
Record inspection in log book and sign
-
Sign
Battery Container 02-BAT-31
Container Exterior
-
Check perimeter of container for security, corrosion, rust and moisture build up. Rub down and patch paint as required
-
Check earthing connections present and in good condition
-
(Using safe methods of access) Check roof of container for foreign debris, nesting, pools of water and other breaches
-
Check beneath the container for foreign debris, nesting, corrosion and other breaches
-
Check fire indicator above door
HVAC
-
Check fans for excessive vibration/noise
-
Check for condensation water and clean condensation drain if nescessary
-
Check pipe insulation in place and replace if necessary
-
Wipe down units
Container Interior
-
Check for correct operation of doors and door contacts if present
-
Check for correct operation of lighting circuits
-
Check fire alarm panel for correct operation and presence of faults
-
Check NOVEC gauge for correct pressure
-
Check for internal condensation
-
Check HVAC for correct temperature settings and operation
-
Check for excessive vibration on HVAC units
- Satisfactory
- Unsatisfactory
- NA
-
Check cabinet doors are secure and do not present an obstruction
-
Check ACBs for correct engagement, overall condition and correct spring status
-
Check for any tripped MCBs and reset. Investigate if unable to.
Batteries
-
Check for any wire distortions or change of colour
-
Check for rust, verdigris or corundum
-
Check for any chemical or corrosive smells
-
Check for battery fan operation
-
Check overall condition of batteries
General
-
Clean container
-
Record inspection in log book and sign
-
Sign
Battery Container 02-BAT-32
Container Exterior
-
Check perimeter of container for security, corrosion, rust and moisture build up. Rub down and patch paint as required
-
Check earthing connections present and in good condition
-
(Using safe methods of access) Check roof of container for foreign debris, nesting, pools of water and other breaches
-
Check beneath the container for foreign debris, nesting, corrosion and other breaches
-
Check fire indicator above door
HVAC
-
Check fans for excessive vibration/noise
-
Check for condensation water and clean condensation drain if nescessary
-
Check pipe insulation in place and replace if necessary
-
Wipe down units
Container Interior
-
Check for correct operation of doors and door contacts if present
-
Check for correct operation of lighting circuits
-
Check fire alarm panel for correct operation and presence of faults
-
Check NOVEC gauge for correct pressure
-
Check for internal condensation
-
Check HVAC for correct temperature settings and operation
-
Check for excessive vibration on HVAC units
- Satisfactory
- Unsatisfactory
- NA
-
Check cabinet doors are secure and do not present an obstruction
-
Check ACBs for correct engagement, overall condition and correct spring status
-
Check for any tripped MCBs and reset. Investigate if unable to.
Batteries
-
Check for any wire distortions or change of colour
-
Check for rust, verdigris or corundum
-
Check for any chemical or corrosive smells
-
Check for battery fan operation
-
Check overall condition of batteries
General
-
Clean container
-
Record inspection in log book and sign
-
Sign
Battery Container 02-BAT-41
Container Exterior
-
Check perimeter of container for security, corrosion, rust and moisture build up. Rub down and patch paint as required
-
Check earthing connections present and in good condition
-
(Using safe methods of access) Check roof of container for foreign debris, nesting, pools of water and other breaches
-
Check beneath the container for foreign debris, nesting, corrosion and other breaches
-
Check fire indicator above door
HVAC
-
Check fans for excessive vibration/noise
-
Check for condensation water and clean condensation drain if nescessary
-
Check pipe insulation in place and replace if necessary
-
Wipe down units
Container Interior
-
Check for correct operation of doors and door contacts if present
-
Check for correct operation of lighting circuits
-
Check fire alarm panel for correct operation and presence of faults
-
Check NOVEC gauge for correct pressure
-
Check for internal condensation
-
Check HVAC for correct temperature settings and operation
-
Check for excessive vibration on HVAC units
- Satisfactory
- Unsatisfactory
- NA
-
Check cabinet doors are secure and do not present an obstruction
-
Check ACBs for correct engagement, overall condition and correct spring status
-
Check for any tripped MCBs and reset. Investigate if unable to.
Batteries
-
Check for any wire distortions or change of colour
-
Check for rust, verdigris or corundum
-
Check for any chemical or corrosive smells
-
Check for battery fan operation
-
Check overall condition of batteries
General
-
Clean container
-
Record inspection in log book and sign
-
Sign
