Beech Court/Hold Court - Contractor proposal remedial works 2.0

• Project

  PTOL Pendleton Towers

undefined

• Block

  Holm

  Beech

• Date

  Date

• Elevation

  Select North South East West

  • North
  • South
  • East
  • West

• QA zone

• Ipad

  2

  3

  4

• Members

  Select CIPRIAN MORARU DANIEL ROTARU ALEXANDRU PATRAS SERGIU TVERDOHLEB PETRU IACHIM

  • CIPRIAN MORARU
  • DANIEL ROTARU
  • ALEXANDRU PATRAS
  • SERGIU TVERDOHLEB
  • PETRU IACHIM

EPDM to floor slab

• 1.Visual inspection by SCF operative/Manager to determine if concrete /masonry is in satisfactory condition (photo)

  Yes

  No

  N/A

• 2. Prior to EPDM works commencing ensure temperature is a minimum of 5 degrees centigrade and RH not less than 40% (photo)

  Yes

  No

  N/A

• 3. Using 400mm wide ARBO EPDM and associated products, clean and prime masonry surface with ARBO AF S. Leave to dry for at least one hour no more than 8 hours (photo)

  Yes

  No

  N/A

• 4. Apply ARBO adhesive approximately 8mm beads and spread liberally generally exceeding edges of new EPDM by circa 10mm (photo)

  Yes

  No

  N/A

• 5. Lay and press (using rollers) EPDM membrane strip onto the prepared zone and ensure good adhesive contact. Spread excess adhesive at edges (photo)

  Yes

  No

  N/A

Only apply to clear floor slab zones for this phase of work, DO NOT apply above or below window pods.

• Signed by SCF Manager/QA Manager

  Sign