Belt Sander Linisher Risk Assessment

Inspection date on test tag in date

Inspect condition of lead

All safety signage in place

Check all guards and shields are tight and secure

Check clearance from the backrest and tool post to the belt (should be minimal)

Inspect the condition of belt and replace if required

Inspect tension on belt and adjust if required

Inspect the condition of the body, ensure no loose or worn components

Inspect pedestal foot mounting, ensure tight and sturdy

Inspect operation of on / off switch and E-Stop if fitted

Clean of excess dust and dirt

Exclusion Zone tape and barricades in place?

PPE is available and used?

Dust Extraction in place and working?

Adequate lighting in place?

Isolator switch is in place and operational?

Direct on Line (DOL) Start/ Stop switch is in place and operational?

Emergency stop buttons are mounted prominently where necessary?

"Lock out" or warning "Danger" tags are affixed to all linisher sanders under repair & maintenance?

Operators Manual Available?

SOP on display and followed?