Information
-
Site
-
Document No.
-
Conducted on
-
Prepared by
Asset
-
Inspection date on test tag in date
-
Inspect condition of lead
-
All safety signage in place
-
Check all guards and shields are tight and secure
-
Check clearance from the backrest and tool post to the belt (should be minimal)
-
Inspect the condition of belt and replace if required
-
Inspect tension on belt and adjust if required
-
Inspect the condition of the body, ensure no loose or worn components
-
Inspect pedestal foot mounting, ensure tight and sturdy
-
Inspect operation of on / off switch and E-Stop if fitted
-
Clean of excess dust and dirt
-
Exclusion Zone tape and barricades in place?
-
PPE is available and used?
-
Dust Extraction in place and working?
-
Adequate lighting in place?
Electrical
-
Isolator switch is in place and operational?
-
Direct on Line (DOL) Start/ Stop switch is in place and operational?
-
Emergency stop buttons are mounted prominently where necessary?
-
"Lock out" or warning "Danger" tags are affixed to all linisher sanders under repair & maintenance?
General
-
Operators Manual Available?
-
SOP on display and followed?
-
Signature of person conducting maintenance
